73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: Mr79C10 on November 02, 2007, 11:45:57 am

Title: Bracket for buckets- measurement
Post by: Mr79C10 on November 02, 2007, 11:45:57 am

Does anyone know the measurement between the brackets for bucket seats.
Need a lil help here so i can get the seats  centered properly.

Title: Re: Bracket for buckets- measurement
Post by: Captkaos on November 02, 2007, 12:49:50 pm

between the brackets where?  The left/right bracket, or the left/right seat?
If you have stock ones, they will use the factory outer holes the Bench used.  The center will need a mount made for it.

Title: Re: Bracket for buckets- measurement
Post by: Mr79C10 on November 02, 2007, 04:20:21 pm

Yes that was my question, I have a set of stock brackets, And I know Ill have to fab a piece for the inner drivers side. I just wanted to know  the measurement between the 2 brackets.  Ill be fabricating the inner piece from your web site, the diagram that  you have.

Title: Re: Bracket for buckets- measurement
Post by: Captkaos on November 06, 2007, 09:58:01 am

From outside track to outside track it should be about 15.5"