73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 73-87 Chevy & GMC Trucks => Topic started by: nova801428 on November 13, 2007, 08:12:12 pm

Title: Security!!!
Post by: nova801428 on November 13, 2007, 08:12:12 pm
O.K, I am not sure how many hoods open with out going from the inside of the truck and how many you can open from outside the truck.  But, what is the best way from keeping little scoundrels from opening up my hood and stealing my battery....or anything else?  Thanks
Title: Re: Security!!!
Post by: Lt.Del on November 13, 2007, 08:38:02 pm
what year truck do you have?  I am assuming if it is a year before the hood locks, you can retrofit a later model fastener/cable/lever. 
Title: Re: Security!!!
Post by: VileZambonie on November 13, 2007, 09:13:01 pm
Some models had the inside release. You can easily run the cable and latch for the 73-80 years..
http://www. competitor.com/icatalog/cc/0033.asp
Title: Re: Security!!!
Post by: 123 pugsy on November 14, 2007, 05:33:05 am
I ran my 79 as a daily driver for 10 years with no problems. Don't you have faith in your fellow man?  ::)  :P
Title: Re: Security!!!
Post by: JJSZABO on November 14, 2007, 07:50:16 am
I have faith in my fellow "man", but little scoundrels are another thing   ;)
Title: Re: Security!!!
Post by: nova801428 on November 14, 2007, 09:08:37 am
Thanks for the suggestions, I might just do that.  People at my school can't keep their tiny little sticky hands off of peoples nice stuff....but my truck won't be finished by then.
Title: Re: Security!!!
Post by: Blazin on November 15, 2007, 05:34:53 am
Weld on a pad lock hasp! ::) I did that for a buddies hunting Blazer. Welded two on the rear gate, two on the hood, and one on each door. They still could have broken the glass but that takes a little more sack, which most dirt bags don't have!
Title: Re: Security!!!
Post by: 85MudMonster on November 15, 2007, 06:25:31 am
did he keep his guns in the truck or something? Why all the padlocks?
Title: Re: Security!!!
Post by: Fordeatinz71 on November 15, 2007, 09:28:11 pm
you can bolt a chain to the underside of the hood, and to the bottom of the core support and lock it...or the less ghetto way, you can install the factory hood release like was mentioned above...it started being installed in 1981 on the new trucks...and was an option on some older trucks...
Title: Re: Security!!!
Post by: nova801428 on November 15, 2007, 10:12:47 pm
I am not sure what I want to do.  I might just leave it alone.  It is kind of cool I don't have to unlock my truck to work on it.
Title: Re: Security!!!
Post by: Mr79C10 on November 17, 2007, 05:34:40 am
Ive been wanting to o the same thing. With a $180.00 Optima under the hood.  Every bit of security will help.
Title: Re: Security!!!
Post by: 85MudMonster on November 19, 2007, 08:53:16 pm
if you want to keep people out and you have $30 and a drill get this:

http://store.summitracing.com/egnsearch.asp?Ntk=KeywordSearch&DDS=1&Ntt=locking+hood+pins&searchinresults=false&N=+115 (http://store.summitracing.com/egnsearch.asp?Ntk=KeywordSearch&DDS=1&Ntt=locking+hood+pins&searchinresults=false&N=+115)