73-87chevytrucks.com
General Site Info => General Discussion => Topic started by: Redneckchevy on January 29, 2008, 10:23:18 am
-
How do u get the head lights to stop floating??? Only 2 adjusters...and i have the head light aimed ware it needs to be ...But its not stiff..Just kinda floats???
-
Are the springs in place?
-
Springs????? what springs?????
-
How about the springs that hold tension on the h/light bucket? There should be one on each lamp assembly in the corner opposit of the 2 adjusters. They sometimes rust and brake off or stretch with fitigue. Also make sure that all 4 screws are securing the retaining ring to the bucket sandwiching the bulb in place.
-
Well i just Replaced both housings...the other ones wear so rotted...I didnt take no springs off...didnt think any went on....Do they sell em at auto zone?
(http://i261.photobucket.com/albums/ii69/chevroletcustomdeluxe/DSC00002.jpg)
-
More than likely. It probly would be helpfull to look at an identical truck or at one of the online headlamp exploded veiws at one of the resteration suppliers website.
-
Springs????? what springs?????
LOL :D :D
truck has springs:
http://www. competitor.com/icatalog/cc/full.asp?page=159 (as an example)
Also, check junk yards.
-
lol...I gotta remember that springs to u guys was high tech..j/k
i looked in my manual..and seen that it takes springs....But u gotta admit...That bucket is shot...and there was no spring that came off that
-
If you look at the picture the bottom left is an indentation. That is where the spring goes. It is mounted in the core support.