73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: mikewb on February 04, 2008, 08:40:16 pm

Title: downshift cable
Post by: mikewb on February 04, 2008, 08:40:16 pm

anybody know how and what to the cable hooks to on a edelbrock carburetor

Title: Re: downshift cable
Post by: muddnutz on February 10, 2008, 12:20:42 pm

  YOU HAVE TO BUY THE ATTACHMENT EXTRA  A SMALL STUD THAT GOES IN THE BOTTOM HOLE .  ABOUT 5-8$

Title: Re: downshift cable
Post by: mikewb on February 10, 2008, 04:49:04 pm

if it doesnt work. is there something to fix. or is it broke inside the trans?

Title: Re: downshift cable
Post by: 77c15 on February 10, 2008, 06:13:39 pm

If you have the stud from them for our trucks (GM kickdown cable adapter in Edelbrock package) and you hooked it up and it didn't function correctly, it probaby just needs to be adjusted.

Title: Re: downshift cable
Post by: mikewb on February 11, 2008, 03:19:45 pm

its adjusted far back as goes but it still wont kick down

Title: Re: downshift cable
Post by: VileZambonie on February 11, 2008, 05:31:29 pm

What transmission do you have? If you disconnect it from the carb is there spring tension on it when you pull it?

Title: Re: downshift cable
Post by: mikewb on February 11, 2008, 05:35:37 pm

th350 and yeah it has tension. it hasnt ever been hooked up. i hooked it up the other day and it doesnt work. i didnt know if it not being used ruins it