73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: dwg30 on March 03, 2008, 09:46:15 pm

Title: Core support ?'s
Post by: dwg30 on March 03, 2008, 09:46:15 pm

I am going to change the core support in my truck this weekend. Will I have to remove the fenders to change this or just unbolt everything and it should come out?

Title: Re: Core support ?'s
Post by: Blazin on March 03, 2008, 10:52:43 pm

It is easier witout the fenders but it can be done without removing them.

Title: Re: Core support ?'s
Post by: dumbucket1 on March 04, 2008, 04:03:05 am

I have taken many off with the fenders on, you just have to have a friend help spread the front of the fenders out as you lift the core support out.

Title: Re: Core support ?'s
Post by: SLUG on March 04, 2008, 07:48:34 am

YOU MIGHT CONSIDER REMOVEING THE FRONT BUMPER ALSO SO YOU CAN SPREAD THE FENDERS APART

Title: Re: Core support ?'s
Post by: dwg30 on March 04, 2008, 08:40:27 am

Thanks for the info

It looked like it could be done with the fenders on but I just wanted to make sure.

Title: Re: Core support ?'s
Post by: Blazin on March 04, 2008, 12:30:13 pm

It can be done with the bumper and radiator still in place. Just takes a little finagling!

Title: Re: Core support ?'s
Post by: dwg30 on March 14, 2008, 11:07:58 am

Done....It wasn't near as bad as I thought it would be. I was able to do it myself leaving fenders, radiator and condenser all in place.