73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Members Rides => Topic started by: OutFoxed on March 14, 2008, 10:00:11 am
-
Just picked up this badboy yesterday after weeks and weeks of truck searching. Pretty much bought it as a roller as the seller stated it needed a motor due to some overheating issues.
Out of all the trucks I saw in person and on the web, this one by far was in way better condition compared to what I had seen for the price.
It is pretty much a one owner truck, I bought it from a family who bought it for there 17yr old. They only had it for a little over a month, and parked it after it overheated.
I'll go over it this weekend and hopefully find something minimal. I've only checked the oils and dont see any water in them.
(http://i142.photobucket.com/albums/r114/OutFoxed91/P3130360.jpg)
(http://i142.photobucket.com/albums/r114/OutFoxed91/P3130361.jpg)
(http://i142.photobucket.com/albums/r114/OutFoxed91/P3130362.jpg)
-
Looks like a clean start.
-
Nice fine! How much was it?
-
welcome, nice truck
-
Nice truck....reminds me of mine when I first bought it.
-
Welcome! Looks like a good starting point. Isn't amazing to see how high the stock 2wd trucks are? At first glance, I thought it was a 4x4. I think the wheels had something to do with it. After seeing/owning them lowered, a stock one just looks wrong. Lorne
-
Nice truck. I can see that one with a blower and huge back tires running in the 10's
-
Congrats with the Great Start 8), Personally I would replace the hoses,Radiator Cap(Simple yes, but you would be suprised at how many people don't know to replace it at proper intervals, or even use the Correct Replacement!!!)& the T-stat, then give it a Cooling System Flush.... Don't just drain and refill the Coolant, completely Flush the Old out, along with any Crud, seperate the Heater Core from the rest of the System, to give it a througho Flush itself, and then Refill the System.... Be Prepared, it can be as simple as just needing the Full Flush,Hoses,T-stat, or you may need to replace the Water Pump & Gaskets.... Watch or inspect the Radiator for any signs of a Leak(s) there, especially the side Tanks/Coolers(A simple Pin hole will be a Night Mare tring to diagnos, or find for that matter)...
Also out of curiosity, what signs did it have that it was overheating, or did it actually start to steam??? Reason why I ask, I have had plenty experience of people just depending on their temp gauge/light, only to find out it was a Faulty Sensor/Relay/Light/Gauge....
Good Luck with your New Project, and Welcome!
-
It is pretty much a one owner truck, I bought it from a family who bought it for there 17yr old. They only had it for a little over a month, and parked it after it overheated.
They probably put the thermostat in backwards :D. Happens all the time where I'm from. I'd just take all the hoses off, flush the radiator, get a new thermostat and put back together and be done with it. Should be no overheating after that.
Nice truck though! What's the specs on it?
-
Thanks for the welcome....
I paid $1700 for the truck, which I think was a decent price for the condition of it. These body style trucks are pricey here in Texas.
So I tooled around with it and believe it may need an engine, but thats my opinion and I'm no mechanic. When I checked the fluids, oil was normal color, and tranny fluid was also. Checked the water level and noticed it was empty, proceeded to add water and it started pouring out from the water pump. So I replace the W/P and finally get it started, shows good water flow. Then I check the oil again and its milky!!!! May be a head gasket, may be the block dont know. I'm just going to let my mech take a look and make the call.
-
Well it needed a rebuild..... But instead of rebuilding the 305, we dropped a bored, cammed, and stroked 350 shortblock with some ported and polished iron heads. The engine was originally intended from my buddys 86swb but he aquired a LS-Juan and I scooped up the deal on his unused engine. Just waiting to get the exhaust done, currently just sitting with some open headers!!!! Got a hold of some rallys and a different center grill. New pics of truck and interior. Interior isnt the best out there, but I've seen a lot worse.
(http://i142.photobucket.com/albums/r114/OutFoxed91/P3240368.jpg)
(http://i142.photobucket.com/albums/r114/OutFoxed91/P3240370.jpg)
(http://i142.photobucket.com/albums/r114/OutFoxed91/P3240364.jpg)
-
$1700??? Thats it????? i would throw $1700 and start dancing like a fool if i found a deal like that..Even if it didnt have a engine at all i would be doing the hillbilly shuffle!
-
I probably wont sink any more money into it till after my Mustang is finished, been sitting for over a 1 1/2 years. But what I'm planning is some candy or pearl traditional (red,orange,white) colored flames over suede/flat black paint a 3/5 drop and some deep dish 15x10 rallys out back and some 15x8 in the front. At least thats the vision I have now!!!
-
$1700??? Thats it????? i would throw $1700 and start dancing like a fool if i found a deal like that..Even if it didnt have a engine at all i would be doing the hillbilly shuffle!
$1700 Thats It!!!!! I thought it was a heck of a deal for the shape.
I did do a little shuffle after I heard the new heart fire up!!!!!!!
-
Nice rig, good deal too.
-
im digging the rallies...looks real good
-
Cant go wrong with the rallies :P
(http://a663.ac-images.myspacecdn.com/images01/112/l_e7163171bd626b5c1d7885f9702d4486.jpg)
-
Our trucks look very similar. And yeah, you got a good deal on that truck. The previous owner of my truck wanted $4500. I gave him $4000, but couldn't come up with the rest, so he said he'd accept the engine back as payment. So that's what I did. I basically paid $4000 for a rolling chassis. The motor was crap anyway and I ended up building the truck into something nice. Where in Texas do you live? I'm near San Antonio.
-
Thanks for the comments..... And yes Rallys have a look all there own. I may end up ordering a pair of 15x10's I found on ebay. Either wheels or drop it, its all I get for now my wife says!!!! :(
I'm from Houston, team3.
-
Here are some pics of my previous ride and my current toy.
'99 F150, sold and bought the 86.
(http://i142.photobucket.com/albums/r114/OutFoxed91/auto/99effie.jpg)
'91 GT, under going a heart transplant. Should be close to 400 ponies off all motor.
(http://i142.photobucket.com/albums/r114/OutFoxed91/P4160241.jpg)
-
Welcome from Dayton Oh. To cool, way to go on the purchase. I'm going to ask my mom why I didn't get one on my 17th birthday. Now she officially owes me!!!!!!!!!!!!!!!!!!
-
nice truck and nice choice on the motor! i love that black Silverado interior! really clean truck...i gave $3,500 for mine in San Antonio from the original owner, with 71k original miles...
-
That's a pretty nice looking Ford. I was planning to build my wife's truck just like that, except in black pearl. Maybe oneday we can meet up at the track...most of my family is from/in Houston(not sure what part though).
-
. Maybe oneday we can meet up at the track...most of my family is from/in Houston(not sure what part though).
Sounds good to me..... If you ever head out this way let me know. And if I ever go that way I'll do the same. I've never been to the track, but I'll soon have 2 track capable rides ready to run.