73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Topic started by: gold84gmc on April 11, 2008, 05:28:26 am

Title: dash removal
Post by: gold84gmc on April 11, 2008, 05:28:26 am

does anyone have a diagram of the screws or a pic on how to remove the dash in an 84 gmc

Title: Re: dash removal
Post by: frogman68 on April 11, 2008, 06:28:55 am

Are you talking the dash pad (vinyl)? If so there is screws along the bottom on the passenger side (open the passenger door there is one go into the dash there.
on the driver side take the instrument bezel off theres some screws there. once screws are out pull gently towards you if it doesnt move check again for screws.

If you are talking about the dash (metal) piece that is spot welded along the windshield channel

Title: Re: dash removal
Post by: gold84gmc on April 11, 2008, 02:05:18 pm

im talking about the dash pad...sorry i didnt secify...k thats what i thought....cause ive taken the gauge bezel off before and saw some screws....is there anything connected to the dash pad that i have to disconnect?

Title: Re: dash removal
Post by: Blazin on April 13, 2008, 10:41:47 am

You should only have the screws that hole the gage cover on on the drivers side. and the screws along the bottom edge on the passengers side. Plus one on the end when you open the pasengers door.

Title: Re: dash removal
Post by: VileZambonie on April 13, 2008, 10:42:45 am

And your A/C vent hose if equipped