73-87chevytrucks.com

General Site Info => Welcome => Topic started by: 1quik85 on April 11, 2008, 07:29:40 pm

Title: hello all
Post by: 1quik85 on April 11, 2008, 07:29:40 pm

new to the bored!!!!

was wondering where i can find a 85-87 chevy/ gmc pickup hydraulic clutch setup???
i need clutch/brake pedal assembly, and the master cylinder etc

my truck currently has a 700r4, looking to convert to manual, thanks!!!

Title: Re: hello all
Post by: Blazin on April 12, 2008, 07:49:11 am

Welcome from New Hampshaa!
Wrecking / salvage yard would be your best bet.

Title: Re: hello all
Post by: cubicdollars on April 12, 2008, 08:41:27 am

Welcome aboard  :)

  Truck has the entire clutch setup for you.

Title: Re: hello all
Post by: autorepr on April 12, 2008, 09:15:59 am

If your going for a race look I have a Willwood pedal assembly and master and slave cylinder on my PRO 4 race truck. It would take some modifying but would look pretty tough on a street truck. They make a triple master cyl. all in one mount set up, two for the brake system with a built in brake bias adjuster and one for the clutch set up.

Or for a stock look you can go to the bone yards in your area. Make sure they're not all worn out.


Oh yeah, I almost forgot,,,,, WELCOME from Dayton Ohio!!!!!!!!!

Title: Re: hello all
Post by: 1quik85 on April 12, 2008, 05:37:04 pm

well thanks guys!

and i lost all my tools about 2 years ago when i moved. so i am pretty much tryin to convert it without modifying stuff. but if you could post some pics i could check it out and it may be worth the hassle!

and there is not a boneyard with a 85-87 chevy manual truck within 100 miles radius here!

Title: Re: hello all
Post by: joesgarage71 on April 13, 2008, 10:25:43 am

 Welcome

Title: Re: hello all
Post by: Captkaos on April 14, 2008, 11:22:47 am

Welcome to the site.

Title: Re: hello all
Post by: JJSZABO on April 14, 2008, 11:32:03 am

Welcome  ;D