73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: plowking_90 on June 14, 2008, 10:25:46 am
-
brand new seal still leaks looks like it coming from where the drive shaft goes in any help
-
Clean up the the shaft with some emery cloth. When you replace the seal make sure you pack the lip of the seal with some petroleum jelly.
-
WHAT ECACTLY IS EMERY CLOTH???
-
It's a fine type of sand paper for polishing metal.
(http://www.johnsonabrasives.com/images/grade2.jpg)
Also make sure your drive line angles are correct and your output bushing is in good shape.
-
Plowking, Can you see/feel a groove on the yoke where the seal has been riding? How much yoke is slid into the transfer case?