73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Interior & Equipment => Seats and Restraints => Topic started by: vince311 on June 17, 2008, 04:10:30 PM

Title: Seat belts for bench seat
Post by: vince311 on June 17, 2008, 04:10:30 PM
I'm looking to swap out my tired belts for new technology. Have found a couple sources...wondering if anyone has good or bad experience, or has another source not listed?

I plan on going with black....  retractable shoulder belts and then a standard lap belt for the center seat.

1) http://www.trubelt.com/products/details/id/3 (http://www.trubelt.com/products/details/id/3)

2) http://www.eastwoodco.com/jump.jsp?itemID=22167&itemType=PRODUCT (http://www.eastwoodco.com/jump.jsp?itemID=22167&itemType=PRODUCT)

3) http://wescoperformance.stores.yahoo.net/resebe.html (http://wescoperformance.stores.yahoo.net/resebe.html)

Title: Re: Seat belts for bench seat
Post by: Captkaos on June 17, 2008, 06:42:56 PM
I can get you these, this is my suppliers site: http://www.seatbeltsonly.com/#
Title: Re: Seat belts for bench seat
Post by: vince311 on June 17, 2008, 07:18:02 PM
Quote from: Captkaos on June 17, 2008, 06:42:56 PM
I can get you these, this is my suppliers site: http://www.seatbeltsonly.com/#


thanks. nice belts...but about twice the cost of other sources. are the prices on their site what you pay for the belts?
Title: Re: Seat belts for bench seat
Post by: Captkaos on June 18, 2008, 12:00:34 AM
No, that is the retail price.
Title: Re: Seat belts for bench seat
Post by: choptop on June 18, 2008, 08:58:57 AM
Quote from: vince311 on June 17, 2008, 07:18:02 PM
Quote from: Captkaos on June 17, 2008, 06:42:56 PM
I can get you these, this is my suppliers site: http://www.seatbeltsonly.com/#


thanks. nice belts...but about twice the cost of other sources. are the prices on their site what you pay for the belts?

You have to be careful about buying seat belts based off of price. Most of the cheeaper ones I have seen were thin and the retract mechanism didn't last long. Make sure they are quality, or you'll be replacing them again.
Title: Re: Seat belts for bench seat
Post by: Clintond on June 18, 2008, 08:46:26 PM
I bought these for my 75.     http://wescoperformance.stores.yahoo.net/am4point.html
Title: Re: Seat belts for bench seat
Post by: comp on June 19, 2008, 12:56:51 PM
Quote from: Clintond on June 18, 2008, 08:46:26 PM
I bought these for my 75.     http://wescoperformance.stores.yahoo.net/am4point.html

 not bad for bucket seats
Title: Re: Seat belts for bench seat
Post by: vince311 on June 19, 2008, 06:42:57 PM
Quote from: choptop on June 18, 2008, 08:58:57 AM
Quote from: vince311 on June 17, 2008, 07:18:02 PM
Quote from: Captkaos on June 17, 2008, 06:42:56 PM
I can get you these, this is my suppliers site: http://www.seatbeltsonly.com/#


thanks. nice belts...but about twice the cost of other sources. are the prices on their site what you pay for the belts?

You have to be careful about buying seat belts based off of price. Most of the cheeaper ones I have seen were thin and the retract mechanism didn't last long. Make sure they are quality, or you'll be replacing them again.


thanks. that's why I'm inquiring to what other folks have used or bought.
Title: Re: Seat belts for bench seat
Post by: lawdog49 on June 21, 2008, 08:57:37 PM
those 4-points look good- especially for the kiddos in the back two rows of my Burb.  seems mine won't lock- seems strange they all are like that, the shoulder part is totally useless.