73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: lowriderbowtie on July 02, 2008, 06:24:50 pm

Title: Floor pan replacement
Post by: lowriderbowtie on July 02, 2008, 06:24:50 pm

Is there any how-to's on replaceing floor pans?  My drivers side pan is see threw and I wanna attepmt to fix it myself.  Never done much for body work, So I figured its a good place to start since nobody else will have to look at it when its done

Title: Re: Floor pan replacement
Post by: VileZambonie on July 02, 2008, 07:00:41 pm

If the cab supports in good condition then just cut out the rotted area and buy a new floor pan. Cut the new floor pan to fit and weld it in. Paint it when you're done with something good and then throw a new rug over it.

Title: Re: Floor pan replacement
Post by: lowriderbowtie on July 02, 2008, 09:49:47 pm

sounds simple enough  8)

Title: Re: Floor pan replacement
Post by: Captkaos on July 07, 2008, 02:32:39 pm

Do a search on JJSAZBO username and floorpans.  He has installed the 5 piece we sell...

Title: Re: Floor pan replacement
Post by: biodiesel84 on July 07, 2008, 08:25:00 pm

JJSZABO...you forgot a letter...I searched and searched and didn't find anything so I went looking in the members list...

Chuck.

Title: Re: Floor pan replacement
Post by: JJSZABO on July 10, 2008, 08:42:41 am

Sorry - I've been off the site for a while - can't seem to find time.....

Here is the link:
http://forum.73-87chevytrucks.com/smforum/index.php?topic=5661.0

Good luck and have fun - let us know if you have any questions.

Jeff