73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: hotrod24 on July 10, 2008, 12:00:15 pm

Title: sliding glass window
Post by: hotrod24 on July 10, 2008, 12:00:15 pm

ok i have tryed to put my window back in but it want go in so how do i use the string? and where do i start i was using a screw driver to do it and that did not work.

Title: Re: sliding glass window
Post by: Captkaos on July 10, 2008, 12:08:17 pm

Wrap the seal around the window, set the bottom on top of the opening and seat the seal, push it up to the window and get the corners in.  Wrap the rope from one side to the other, have someone on the outside push it in and pull on the rope.

Title: Re: sliding glass window
Post by: hotrod24 on July 10, 2008, 12:19:06 pm

thank you

Title: Re: sliding glass window
Post by: hotrod24 on July 14, 2008, 09:30:49 pm

ok i been working on the rust for the window but i can not get in the corners with nothing what would be a good thing to use could i use a sand blaster

(http://i222.photobucket.com/albums/dd224/74chevy/SANY0006.jpg)

Title: Re: sliding glass window
Post by: hotrod24 on July 15, 2008, 10:59:25 pm

ok would this do the job

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=40925

Title: Re: sliding glass window
Post by: Captkaos on July 16, 2008, 10:50:29 am

that will remove it!