73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: onecustom73 on August 09, 2008, 10:59:00 pm
-
my 73' 3/4 ton 4x4 looks like there is plenty of room to drop down the oil pan,just curious if anyone had any problem with these,i beleive i should be able to take out the bolts and let it down,im not aware of anything else i need to do,i hope!im going to use a 1 piece fel-pro gasket for replecment!
-
i believe you have a two-piece rear main seal i think. and i think the bottom seal for the rear main ties into the oil pan seal. just my 2 cents someone else will chime in here im sure
-
You should be able to drop the pan and replace it. I have done it on a couple trucks.