73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => The Highs (Raising/Lifts) => Topic started by: Heffa on August 20, 2008, 02:15:11 am

Title: 84 3/4 ton 2wd need to lift the nose a bit
Post by: Heffa on August 20, 2008, 02:15:11 am

I hate for my first post to be a question but I need some help. I want to level my 3/4 ton 2wd by going up in the nose. I have looked and looked and all I can find is a Rancho kit that lift's the whole truck 1 1/2 inches which will still not sit level. Is there a place that I could get just a  1 1/2 or so front spring? The back is 35" to the fender and the front is 33 3/4.  Thanks and Hi guys!!!!

Title: Re: 84 3/4 ton 2wd need to lift the nose a bit
Post by: Captkaos on August 20, 2008, 09:45:38 am

If the springs are original, you can get new 3/4T springs and that will lift it up some.  1T truck springs will have a little more height.

Title: Re: 84 3/4 ton 2wd need to lift the nose a bit
Post by: VileZambonie on August 20, 2008, 10:03:27 am

Use an add a leaf

Title: Re: 84 3/4 ton 2wd need to lift the nose a bit
Post by: Captkaos on August 20, 2008, 10:05:52 am

It's a 4x2 Vile...  Or are you talking about the rear?

Title: Re: 84 3/4 ton 2wd need to lift the nose a bit
Post by: VileZambonie on August 20, 2008, 10:15:14 am

Good call! lol