73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Brakes, Frame, Steering & Suspension => Topic started by: team39763 on October 17, 2008, 03:09:56 pm

Title: Can I remove the UCA safely?
Post by: team39763 on October 17, 2008, 03:09:56 pm

I need to do some work on the upper control arm/bushings.  Is it possible for me to disconnect it from the frame while it's still connected to the spindle?  Will the spring pop out on me or anything?  What's the easiest way to remove the bushings and reinstall new ones?  Thanks.

Title: Re: Can I remove the UCA safely?
Post by: VileZambonie on October 17, 2008, 04:11:58 pm

Just support the lower control arm with a floor jack. Best method is a press or ball joint pres

Title: Re: Can I remove the UCA safely?
Post by: ms4972 on October 28, 2008, 10:41:49 pm

Use a torch to burn out the old ones and a press to install the new ones. 

Title: Re: Can I remove the UCA safely?
Post by: JJSZABO on October 29, 2008, 08:37:57 am

I tried to remove mine when I was rebuilding the front end.  I tried all the methods mentioned here and over at 73-87.com garage.  I couldn't get them to budge.  So....I took the control arms to the machine shop and had them remove and install my bushings.  By the way, they burned them out also.  I wouldn't try that method on control arms that are still attached to the truck.