73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: shankbonanza on November 10, 2008, 02:47:36 pm

Title: NP-205
Post by: shankbonanza on November 10, 2008, 02:47:36 pm

     Hey guys, I have a NP-205 that mounts to an adapter plate that then mounts to the TH-350 I have....   My questions is are there any sealing types that are used to connect tranny-adapter-transfercase.  If there are gaskets where the heck can I get them.                                             
                                         Thanks guys

Title: Re: NP-205
Post by: VileZambonie on November 10, 2008, 03:18:46 pm

Just use a good RTV or anaerobic sealer

Title: Re: NP-205
Post by: dunedigger on November 10, 2008, 06:28:06 pm

I picked up the rubber ring gasket made for this from the local tranny shop.  No other sealant.  Mine hasn't leaked a drop in 14 years it's been in.

Title: Re: NP-205
Post by: Donut on November 10, 2008, 07:59:35 pm

What they said!

Rubber ring gasket where the adapter bolts to the trans (I found mine at NAPA), and RTV for the rear.  I couldn't find the rear one locally.