73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: 84shortbed on November 14, 2008, 11:09:14 pm
-
It`s a Crane SBC cam. Here is the link to the specs
http://cranecams.com/?show=browseParts&action=partSpec&partNumber=113932&lvl=2&prt=5
My 355 is 9.2:1 compression and I have Speed Pro flat top hypers. The heads are 882 heads that already had 2.02/1.6 valves in them when I got them. It`s going in my 84 step side.
-
What is your goal? What intake do you have on it? Carb? Headers? what transmission and final drive gears do you have? I would go more aggressive personally.
-
It`s for my daily driver . I`m going to use a performer intake with egr and my original q-jet. I`m planning on headers eventually but I`ll run the stock exhaust manifolds for not. The tranny is a 700R4 with a stock converter which I don`t want to change and I don`t know the rearend ratio yet. I can`t go too wild because it has to pass CA smog. I haven`t had anything I had to smog in a long time and I usually go with a bigger cam and more compression but since I have to smog this I don`t know how big I can get away with.
-
I would look at a CARB exempt cam if you have to pass emissions.
-
I would look at a CARB exempt cam if you have to pass emissions.
It is a CARB cam.
CARB EO Number: D-225-18