« previous next »
Pages: [1]   Go Down

Author Topic: 1/2 ton to 3/4 ton  (Read 6248 times)

Offline 79k10+85k5

  • Newbie
  • Posts: 14
1/2 ton to 3/4 ton
« on: January 17, 2011, 11:37:41 am »
hey guys  im in need of some help.  i got a 79 shortbed 1/2 ton.  i got a set of 3/4 ton 4.56 axles to put in .  is there any modifications i need to make this work?  and im also ordering a new 8 inch lift.  should i buy one for a 3/4 ton truck or a 1/2 ton truck?  thanks for any help you can give me
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 1/2 ton to 3/4 ton
« Reply #1 on: January 17, 2011, 12:18:23 pm »
     If the 3/4 ton axles are out of a 73-87 truck they will swap right over.  Order the lift for the 3/4 ton since you are running 3/4 ton axles, they will be better if you plan on using your truck for hauling anything.  The only modifications you might have to do is to the yolks on your driveshafts.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 79k10+85k5

  • Newbie
  • Posts: 14
Re: 1/2 ton to 3/4 ton
« Reply #2 on: January 17, 2011, 12:20:26 pm »
The truck aint really gonna be haulin or pulling much maybe a quad or something thats about it.  thankyou for the quick response.  i cant wait to get er done
Logged

Offline 79k10+85k5

  • Newbie
  • Posts: 14
Re: 1/2 ton to 3/4 ton
« Reply #3 on: January 17, 2011, 12:37:13 pm »
one more question does anyone know where i can get the pitman arm and steering arm for the 8 inch lift?
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 1/2 ton to 3/4 ton
« Reply #4 on: January 17, 2011, 02:36:11 pm »
     Where you get the lift from you should be able to get those parts also.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: 1/2 ton to 3/4 ton
« Reply #5 on: January 17, 2011, 03:27:11 pm »
Quote from: 79k10+85k5 on January 17, 2011, 12:37:13 pm
one more question does anyone know where i can get the pitman arm and steering arm for the 8 inch lift?

Pro Comp, Superlift, and Skyjacker make them, dont know about other companies. Maybe Rancho and maybe Rough Country.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 1/2 ton to 3/4 ton
« Reply #6 on: January 17, 2011, 05:41:46 pm »
If the frame is 1/2 that's the springs you need unless you change the shackles over. Also why 8
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: 1/2 ton to 3/4 ton
« Reply #7 on: January 17, 2011, 05:55:13 pm »
Quote from: Irish_Alley on January 17, 2011, 05:41:46 pm
If the frame is 1/2 that's the springs you need unless you change the shackles over. Also why 8

Because 8 is better than 6!

Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 1/2 ton to 3/4 ton
« Reply #8 on: January 17, 2011, 06:32:08 pm »
Lol but that means new shafts
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 79k10+85k5

  • Newbie
  • Posts: 14
Re: 1/2 ton to 3/4 ton
« Reply #9 on: January 18, 2011, 10:43:16 am »
bigger is better right lol!!   i already need new shafts made due to the mud bog at the county fair last summer.  nuetral dropping it in the mud at 6000 rpms with 37s makes out for a bad time
Logged
Pages: [1]   Go Up
« previous next »