Author Topic: Happy New Year!!  (Read 4911 times)

Offline Lt.Del

  • Andy aka:SgtDel
  • Senior Member
  • ****
  • Posts: 3864
  • DelbridgePhotography.com
    • www.delbridge.net
Happy New Year!!
« on: December 30, 2011, 09:33:31 pm »
Happy New Year!  I hope it is a great one for you and all your resolutions last more than one month.

So, to have record of it, that will hopefully motivate you that much more, what special projects do you want to accomplish in 2012 for your trucks?   New engine, new wheels, new paint?  Post it here to go on record.  And remember, once you post it here, you HAVE to carry it out.  How's that for motivation?

I'll start, in 2012, I will actually wash my '79 pickup at some point. 
« Last Edit: December 30, 2011, 09:36:40 pm by SgtDel »

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Happy New Year!!
« Reply #1 on: December 30, 2011, 09:39:01 pm »
Happy New year to you all from the winter cold of New Hampshaa!!!!

I want to get my 55 back on the road, so I guess that will be my resolution. Its not a truck, but!!!!!
« Last Edit: December 30, 2011, 09:40:43 pm by Blazin »
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18462
    • http://www.73-87chevytrucks.com
Re: Happy New Year!!
« Reply #2 on: December 30, 2011, 09:44:48 pm »
Happy New Year!
Get the 1989 Blazer running/driving
Get the 87 R10 converted and running.

Offline gto109

  • Frequent Member
  • **
  • Posts: 405
Re: Happy New Year!!
« Reply #3 on: December 31, 2011, 02:06:15 am »
Happy New Year.  I would like to get mine painted and get the 454 my buddy is selling.
67 Le Mans Convertible resto project 350 Pontiac w/powerglide,
85 Scottsdale k-10 305 700r4,
86 Trans Am 305 350th
06 Dodge Ram daily driver

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: Happy New Year!!
« Reply #4 on: December 31, 2011, 06:33:20 am »
I want to hear mine run again and move it under its own power. That will motivate me to finish the rest of the body.
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline firefighter

  • Frequent Member
  • **
  • Posts: 462
Re: Happy New Year!!
« Reply #5 on: December 31, 2011, 08:21:20 am »
Happy New Year to all of you.

Thank you for letting me join your awesome website and thank you all very much for great help you give me.

I want to get my project completed before spring. My wife wishes it was done now. Ha Ha !!

Heck, I've learned so much from you guys, I may just start another one when this one is done.   ;D

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Happy New Year!!
« Reply #6 on: December 31, 2011, 09:28:39 am »
     Happy new year to everyone, and may this year bring you more happiness than the last.
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: Happy New Year!!
« Reply #7 on: December 31, 2011, 09:45:15 am »
Happy New Year! Last year I quit smoking, I lasted a few days then I started again then on Jan 23rd I gave it up for good. So I'm coming up on a year smoke free. I also gave up going to the gym and gained like 20 lbs! So this year I plan to get my 74 back together and hit the gym 3 x a week minimum. M-W F to get back to being super sexy for the ladies.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Happy New Year!!
« Reply #8 on: December 31, 2011, 01:16:34 pm »
OK, here goes....  Happy New Year to each and every member here!!!  My #1 New Years resolution is to stop being critical to... well she knows who she is and not say anything if it isn't positive.  #2 quit my procrastination on projects and get them done as well as not taking on any more until the one's I have are at least done as far as they can be with the funds that are available.  #3 take a real vacation...

Many thanks to those who offered help in insight to my questions and those who have bought items from me to help fund my truck projects.
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline 1978 454 Big 10

  • Registered Users
  • *
  • Posts: 101
  • Don't Mess With Texas! :)
Re: Happy New Year!!
« Reply #9 on: December 31, 2011, 11:47:16 pm »
Happy New Year to y'all ! ! !

Sure hope the Mayans are wrong come 12-21-12! :)
1978 Chevy C-10 Silverado "Big 10" 454, 400 turbo, PW, PDL, Tilt, Cruise, AM/FM, Factory Tach, Dual Tanks, Locking Diff, Sliding Rear Window, Trans Cooler, Cordova Brown/Santa Fe Tan. 052,600 Original miles!

Offline DustyRusty

  • Junior Member
  • ***
  • Posts: 567
Re: Happy New Year!!
« Reply #10 on: January 01, 2012, 01:12:59 am »
Happy new year from Alaska.

I resolve to put a new tarp over my truck.  Maybe 2 for good measure!

Rusty
1975 K-10 SWB Fleetside - 350/SM465/NP205/D44F 12-boltR, 3.73 gears.  Original owner.
Customized by rust.