« previous next »
Pages: [1]   Go Down

Author Topic: Common Frame Issues  (Read 3906 times)

Offline bladerunner

  • Registered Users
  • *
  • Posts: 241
Common Frame Issues
« on: February 15, 2012, 09:12:10 am »
A guy at work was asking about tips for buying a 73-87. He was particularly interested in what are the common frame issues on these trucks, if any.  I pointed him at the 4 Wheel Off Road article:

http://www.4wheeloffroad.com/techarticles/131_9706_buying_a_used_chevy_pick/common_problems_best_years.html

It mentions steering box mounting area, near rear shock mounts and crossmembers. I figure that is pretty comprehensive. Anything else worth mentioning as I am NOT a subject expert?
Logged
85 K10 Shortbed
94 Impala SS

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: Common Frame Issues
« Reply #1 on: February 15, 2012, 09:29:13 am »
They are also prone to rust around the spring hangers for the rear springs if they are New England trucks at least. Particularly the front hanger for the rear springs.
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Common Frame Issues
« Reply #2 on: February 15, 2012, 09:37:23 am »
Quote from: bladerunner on February 15, 2012, 09:12:10 am
It mentions steering box mounting area, near rear shock mounts and crossmembers. I figure that is pretty comprehensive. Anything else worth mentioning as I am NOT a subject expert?

     As far as frames go that is pretty much bad area's along with what rusty said, if it is 4x4 and has been mudding, mud collects in the pockets of the rear spring hangers and if not cleaned out can cause rust issue's.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline bladerunner

  • Registered Users
  • *
  • Posts: 241
Re: Common Frame Issues
« Reply #3 on: February 18, 2012, 01:01:57 pm »
As a result of what you said Thirsty, I checked the front hangers for my leaf springs and yep, the driver's side has a hold in it. I banged around trying to see if any more would give way, but it seems solid save for the area highlighted in the pictures (sorry they aren't clearer):





It is about the size of a penny or so. Big enough to get a finger into anyway. Looks like I will need to get it patched.
Logged
85 K10 Shortbed
94 Impala SS

Offline thirsty

  • Senior Member
  • ****
  • Posts: 1289
    • Suitor's Garage
Re: Common Frame Issues
« Reply #4 on: February 18, 2012, 01:14:13 pm »
That's why I converted a 2wd frame to 4wd. It is the third frame under the truck. I couldn't find a 4wd frame anywhere around me that was not damaged in that general area. I would have repaired mine but I got the 2wd frame that was too nice to pass up. Hopefully I will never have issues with frame rust again.
Logged
Real trucks are built, not bought Build thread

Give me a long enough lever and a place to stand, and I shall move the earth or break this bolt...Whatever, just hold my beer!

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Common Frame Issues
« Reply #5 on: February 19, 2012, 07:24:13 am »
     Most people when they do a rebuild don't worry about the frames, thinking they are the strongest part, some good look over and detail to coating them will only mean they will last longer than your body will.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom
Pages: [1]   Go Up
« previous next »