« previous next »
Pages: [1]   Go Down

Author Topic: 1986 C10 4.3L engine  (Read 2747 times)

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7599
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
1986 C10 4.3L engine
« on: May 30, 2022, 03:58:24 pm »
I noticed the 4 prong distributor plug in for what I assume is the ESC?  That engine was ditched a long time ago and a 350 with a normal HEI distributor is going in its place.  Do I have to jump 2 wires in the plug?  It has been forever since I have done anything like that and I can't remember. 
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19210
Re: 1986 C10 4.3L engine
« Reply #1 on: May 31, 2022, 06:56:20 pm »
Jump 2 wires for what? You are not using anything related to the ESC if you have a v8 with an HEI. That is nothing but an old part of the original harness. Are you trying to set the timing?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7599
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: 1986 C10 4.3L engine
« Reply #2 on: May 31, 2022, 08:28:08 pm »
thanks Vile, no engine yet.  2 wires maybe on the distributor used to be jumped, it has been a few years since I have messed with anything this involved. 
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
Re: 1986 C10 4.3L engine
« Reply #3 on: June 16, 2022, 09:32:31 pm »
Sorry for my late reply----i have been busy with family stuff.

i don't think anything needs to be done to the plug if the plug is on the truck side headed to the esc computer.

But let me get you a clear answer, probably this weekend.
Logged
Pages: [1]   Go Up
« previous next »