« previous next »
Pages: [1]   Go Down

Author Topic: shock question  (Read 4274 times)

Offline lawdog49

  • Newbie
  • Posts: 59
shock question
« on: September 07, 2009, 04:36:09 pm »
My 91 4WD Burb has quad shocks up front- was this standard for all Burbs, or is this a heavy duty 1/2 ton option?  Also, can I decode from the glove box sticker what gear ratio I have?  Pretty sure it's a G80, but without jacking it up or pulling a cover I wasn't sure if I could find this info?
Logged
1991 GMC Suburban 1500   -   5.7/AT/4x4/TBI

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: shock question
« Reply #1 on: September 07, 2009, 06:57:20 pm »
 Yes there is all the RPO codes for that truck in the glove, G80 = posi there are different sites that list the RPO's try our sponsor
I think the quad shocks were a op
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18458
    • http://www.73-87chevytrucks.com
Re: shock question
« Reply #2 on: September 08, 2009, 05:06:25 pm »
Quad shocks were an option, it should be listed in the RPO sheet.
Logged
Pages: [1]   Go Up
« previous next »