« previous next »
Pages: [1]   Go Down

Author Topic: Late Model 4L80e Pan on Early Model?  (Read 3000 times)

Offline ehjorten

  • Senior Member
  • ****
  • Posts: 1244
Late Model 4L80e Pan on Early Model?
« on: September 26, 2016, 05:00:44 pm »
Is there any technical reason why I could not fit the 1997-2000+ 4L80e Transmission pan on my 1991 4L80e?  The reason why I ask is it has a drain plug in it stock (GM 24204278), Filter (GM 89016656).  Also...while cast aluminum is nice, it isn't as forgiving at a steel pan!  You can bash a steel pan and be okay, but not an aluminum one.  I would also get the GM composite, reusable gasket (GM 8677743).
Logged
-Erik-
1991 V3500 - Gen V TBI 454, 4L80E, NP205, 14 bolt FF, D60, 8" Lift on 35s
1977 K20 Silverado - 350, THM350, NP203, 14 bolt FF, D44, Stock Lift on 31s
1969 Chevelle Malibu Sport Coupe - EFI350, THM350
1968 Chevrolet Step-side Pickup - 300HP L6

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: Late Model 4L80e Pan on Early Model?
« Reply #1 on: September 26, 2016, 05:56:16 pm »
Aluminum pans increase the structural rigidity of the case and with a quality gasket virtually eliminate leaks. Aluminum all day long.
Logged
LTZ Cheyenne C20

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Late Model 4L80e Pan on Early Model?
« Reply #2 on: September 28, 2016, 04:26:58 pm »
i dont know why but they require a different filter also. 91-96 is one while 97+ is another
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: Late Model 4L80e Pan on Early Model?
« Reply #3 on: September 28, 2016, 04:49:33 pm »
Quote from: Irish_Alley on September 28, 2016, 04:26:58 pm
i dont know why but they require a different filter also. 91-96 is one while 97+ is another
Some pans are deeper than others and the filter sits different against the bottom of the valve body, thus the different filters.
Logged
LTZ Cheyenne C20

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18468
    • http://www.73-87chevytrucks.com
Re: Late Model 4L80e Pan on Early Model?
« Reply #4 on: December 06, 2016, 10:41:48 am »
The 4L80E was redesigned the lubrication system 1997.   Everything  from the center support back has differences.

Chris Lucas
73-87chevytrucks.com
squarebody.biz

Logged
Pages: [1]   Go Up
« previous next »