« previous next »
Pages: [1]   Go Down

Author Topic: c notch  (Read 5416 times)

Offline 1983stepside

  • Frequent Member
  • **
  • Posts: 343
c notch
« on: January 04, 2009, 02:36:29 pm »
im building a 1983 chevy stepside 2wd and i have a 3/5 lowering kit for it 3 in coils in front  and flip kit in the front i was wondering if theres anywhere i can buy c notches most ive seen are bolt on so thats what id like but i cant find them with out being in a kit cuz i dont need the hole lowering kit just the notches so any info would be great thanks 8)
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: c notch
« Reply #1 on: January 04, 2009, 03:13:46 pm »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 1983stepside

  • Frequent Member
  • **
  • Posts: 343
Re: c notch
« Reply #2 on: January 05, 2009, 11:11:25 am »
wow thanks for the fast response the kit i bought didnt come withe the notches but as i looked at my frame and the blocks for the flip kit sitting on the leaf springs i figured it wouldnt hurt to go ahaed and get them so i dont have any issues later down the road thanks again 8)
Logged

Offline three8six

  • Frequent Member
  • **
  • Posts: 486
Re: c notch
« Reply #3 on: January 10, 2009, 05:22:58 pm »
I just bought smaller bump stops and cut off the brackets for it. I got lots of space now.
Logged

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: c notch
« Reply #4 on: January 10, 2009, 09:04:22 pm »
I believe the reason your kit didn't come with them is because you wont need them. Just as 386 said...knock the rivets out of the bumper brackets & you'll have plenty of room. You can either buy the flat bolt-on ones & drill a hole in the frame or make a "L" shaped bracket & reuse the original bump stops beside the frame.  Lorne
Logged

Offline 69byrd

  • Senior Member
  • ****
  • Posts: 1167
  • Haulin!
Re: c notch
« Reply #5 on: January 10, 2009, 10:01:47 pm »
I just took the bump stop brackets off mine and put the little flat bumpstop on it. I have never bottomed out, yet.
Logged
84 C-10 Stepside       
54 Chevy Truck
Gotta Love Those Stepsides!
http://s493.photobucket.com/albums/rr299/69byrd/?start=all

Offline 1983stepside

  • Frequent Member
  • **
  • Posts: 343
Re: c notch
« Reply #6 on: January 11, 2009, 08:38:40 pm »
ya i guess that would be a good reason as to y i dont have them lol i also never thought of tkaeing the old bump stop off and using a smaller one thanks 8)
Logged
Pages: [1]   Go Up
« previous next »