1
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
TODAY
is a Great Day to visit our
Store
and order the parts you need for your truck ! ! !
Home
Forum
Store
Help
Search
Gallery
Login
Register
73-87chevytrucks.com
»
73-87 Chevy _ GMC Trucks
»
Body, Glass & Paint
»
help with LED lights
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: help with LED lights (Read 6505 times)
gold84gmc
Frequent Member
Posts: 483
help with LED lights
«
on:
October 13, 2009, 03:34:04 pm »
i just put in LED parking lights(in the front),brake/blinkers, and reverse lights, if i have the parking lights on and put the blinker on it doesnt blink, the light just gets brighter, but if i dont have the parking lights on they blink and work properly...does anyone know why they are doing this? and yes i have the correct bulbs for the blinkers
Logged
92 buick century custom 3.3L
Captkaos
OWNER and Administrator
Administrator
Senior Member
Posts: 18458
Re: help with LED lights
«
Reply #1 on:
October 13, 2009, 04:55:39 pm »
Most likely you need a HD flasher.
Logged
Chris Lucas
73-87chevytrucks
captkaoscustoms
squarebody
4x4x4x
Newbie
Posts: 72
85k10 diesel
Re: help with LED lights
«
Reply #2 on:
October 13, 2009, 05:46:27 pm »
led lights have very little resistance compaired to std lights. you need a special flasher made for led lights.
please see this site for more info
http://www.superbrightleds.com/carbulb-notes.htm
hope this helps
Logged
85 k10 swb, 6.5 diesel. banks sidewinder turbo, 700r4, auburn gear ected limited slip/lockers f & r, 411 gears, front slotted disks, rear disk brakes, 4"exhaust, cibie headlight and fog lights, rancho rear spring lift, rancho shocks, new ft. springs,
Captkaos
OWNER and Administrator
Administrator
Senior Member
Posts: 18458
Re: help with LED lights
«
Reply #3 on:
October 13, 2009, 06:16:23 pm »
Actually you only need the HD flasher availible at any parts store. Use NAPA 552, we recommend those for the LED taillights we sell.
Logged
Chris Lucas
73-87chevytrucks
captkaoscustoms
squarebody
gold84gmc
Frequent Member
Posts: 483
Re: help with LED lights
«
Reply #4 on:
October 13, 2009, 06:26:53 pm »
ok so i got a napa 552 and a napa 550...the 552 is smaller and have 2 terminals and the 550 is bigger and has 3 terminals...im guessing i should still use the 552?
Logged
92 buick century custom 3.3L
Captkaos
OWNER and Administrator
Administrator
Senior Member
Posts: 18458
Re: help with LED lights
«
Reply #5 on:
October 14, 2009, 07:47:05 pm »
That is what we recommmend on the LED conversion kits we sell.
Logged
Chris Lucas
73-87chevytrucks
captkaoscustoms
squarebody
gold84gmc
Frequent Member
Posts: 483
Re: help with LED lights
«
Reply #6 on:
October 14, 2009, 07:51:30 pm »
ok so im just gonna get some load resistors instead of trying to figure out which flasher will work
Logged
92 buick century custom 3.3L
gold84gmc
Frequent Member
Posts: 483
Re: help with LED lights
«
Reply #7 on:
November 12, 2009, 04:20:55 pm »
so now i have an electronic flasher and i got some resistors (50w 6ohm) 1 for each taillight, and the LEDs still dont work correctly....am i doing something wrong or will i just not be able to use them with my truck
Logged
92 buick century custom 3.3L
beastie_3
Senior Member
Posts: 3170
Josh
Re: help with LED lights
«
Reply #8 on:
November 12, 2009, 09:19:23 pm »
Have you tried swapping back to the regular bulbs to see if it is the LEDs actually screwing things up?
Logged
79 K10
Semper Fi
73-87 Chevy Trucks Facebook Page
gold84gmc
Frequent Member
Posts: 483
Re: help with LED lights
«
Reply #9 on:
November 13, 2009, 05:31:10 am »
yes i have because thats the only way i can get blinkers when i have my lights on....i put LEDs for the front parking lights too, do i have to put resistors on those too?...right now i have LEDs in the front and regular in the back, and all of them work fine but when i put the lights on it thinks the front ones are blown because the blinker things on the dash stay lit up
Logged
92 buick century custom 3.3L
gold84gmc
Frequent Member
Posts: 483
Re: help with LED lights
«
Reply #10 on:
November 29, 2009, 07:44:51 am »
so do i need to put a resistor where ever i put an LED light?
Logged
92 buick century custom 3.3L
Print
Pages: [
1
]
Go Up
« previous
next »
73-87chevytrucks.com
»
73-87 Chevy _ GMC Trucks
»
Body, Glass & Paint
»
help with LED lights