« previous next »
Pages: [1]   Go Down

Author Topic: I want to put a folding bench seat in my '73 K10  (Read 5971 times)

Offline Brady

  • Newbie
  • Posts: 36
I want to put a folding bench seat in my '73 K10
« on: November 17, 2009, 11:21:33 am »

I have read numerous posts on installing bucket seats, but I just want to put a folding bench seat in my '73 K10. It came with a nonfolding bench seat and it is very difficult to get to anything stored behind the seat, such as tools. Can anyone tell me what years would bolt in without having to fabricate brackets.

TIA,
Brady
Logged

Offline frogman68

  • Junior Member
  • ***
  • Posts: 773
Re: I want to put a folding bench seat in my '73 K10
« Reply #1 on: November 17, 2009, 12:29:27 pm »
our 84 has it . that should bolt right in
Logged

Offline Brady

  • Newbie
  • Posts: 36
Re: I want to put a folding bench seat in my '73 K10
« Reply #2 on: November 17, 2009, 04:56:00 pm »
Thanks for the response!  Do you know what range of years might also fit?
Logged

Offline Donut

  • Frequent Member
  • **
  • Posts: 402
Re: I want to put a folding bench seat in my '73 K10
« Reply #3 on: November 17, 2009, 05:01:03 pm »
I'm not positive, but I think '73 was the only year they didn't fold forward.  My '73 doesn't.
Logged
'73 Chevy K-20 ***SOLD***
350/tbh350/np205
My plow was half price if i took the truck with it.

'86 C-30 dually, 454/tbh400

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: I want to put a folding bench seat in my '73 K10
« Reply #4 on: November 17, 2009, 05:24:07 pm »
My 1980 custom deluxe had a non folding seat also. Hated it! Just hunt around because I'm not so sure it had anything to do with a specific year.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: I want to put a folding bench seat in my '73 K10
« Reply #5 on: November 17, 2009, 11:34:45 pm »
If your handy with hog ring pliers just undo the side pieces of vinyl, remove the second bolt from each side, trim the vinyl and re hook it to the seat frame. Have done a couple over the years.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: I want to put a folding bench seat in my '73 K10
« Reply #6 on: November 18, 2009, 04:20:00 am »
Any folding bench will work 73-87 I think the earlier years were an option, and if you got any package but the strip model you got a folding bench seat.
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline Brady

  • Newbie
  • Posts: 36
Re: I want to put a folding bench seat in my '73 K10
« Reply #7 on: November 18, 2009, 09:12:31 am »
Thanks again for all of the responses!

Quote from: Blazin on November 17, 2009, 11:34:45 pm
If your handy with hog ring pliers just undo the side pieces of vinyl, remove the second bolt from each side, trim the vinyl and re hook it to the seat frame. Have done a couple over the years.

I will probably try this first and also keep an eye out for a folding seat.  Maybe I could use lynch pins in place of the second bolts.  This would give a little more security and still be easily removable.
Logged
Pages: [1]   Go Up
« previous next »