« previous next »
Pages: [1]   Go Down

Author Topic: 77 Cheyenne Stepside from Idaho  (Read 6939 times)

Offline ravinwolf

  • Newbie
  • Posts: 3
77 Cheyenne Stepside from Idaho
« on: October 02, 2010, 02:53:49 am »
Hello everyone!!  I'm here to start refreshing my truck and I know this is the best place to start.  I just put in a new highly modified 454 and th400 in my truck, the 69 427 that was in it had a collapsed piston and was to far gone for me to fix.  I am a disabled Iraqi Vet with nothing better to do but fix up my truck and cars.  So to start here is some pics of my truck, let me know what you think and what you think needs attention!  Thanks Wade




Logged

Offline Layne

  • Senior Member
  • ****
  • Posts: 1023
Re: 77 Cheyenne Stepside from Idaho
« Reply #1 on: October 02, 2010, 03:42:28 am »
Nice! Welcome from Illinois
Logged
77 c-10 - 77 400 86 700r4 "Emmy"
83 citation - 2.5L Four on the Floor!
88 sierra - reman 350 700r4 "Eleanor"
All normal practicality and rational money handling goes out of the window when it comes to my truck.

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 77 Cheyenne Stepside from Idaho
« Reply #2 on: October 02, 2010, 06:36:35 am »
Welcome form Maryland, thanks for your sacrifice
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: 77 Cheyenne Stepside from Idaho
« Reply #3 on: October 02, 2010, 06:41:43 am »
Ravin,
Thanks for your service.
Thats a great looking truck that you have.
What are the specs on that 454?
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: 77 Cheyenne Stepside from Idaho
« Reply #4 on: October 02, 2010, 07:34:28 am »
Welcome from NW Indiana, thank you for your service.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline ravinwolf

  • Newbie
  • Posts: 3
Re: 77 Cheyenne Stepside from Idaho
« Reply #5 on: October 02, 2010, 10:16:51 am »
Quote from: fitz on October 02, 2010, 06:41:43 am
Ravin,
Thanks for your service.
Thats a great looking truck that you have.
What are the specs on that 454?
Well this is about all I know on the 454.  It's a 1989 4 bolt main block bored .20 over, 2500$ Scat crank, SRP pistons, custom ground comp cams camshaft, Pro Comp Heads, Full roller lifters, Elderbrock Big Air Gap intake, Holley 750 carb, CSI distributor. I think the compression is about 13.76 just so I can still use premuim fuel.  Next week we are putting on a MSD ignition system and exhaust temp sensors.  I think its a bit much for a 1/2 ton truck but he said the truck will handle it.  He is also wanting me to put 4.10 gears in it.  He said I have no gears with 35" tires and 3.73 gears right now.  I told him him plenty fast for me.  The engine is supposed to be a high torque low rpm motor.  He figured about 500 horse and around 700lbs of torque.
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 77 Cheyenne Stepside from Idaho
« Reply #6 on: October 02, 2010, 02:41:52 pm »
    Welcome from California, and I got to say that is how one of these days I want my 74 step side to look.  It looks awesome, and by no means any less important, thank you for your service to our great nation and for your sacrifice.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: 77 Cheyenne Stepside from Idaho
« Reply #7 on: October 02, 2010, 08:56:24 pm »
Great stepper! Thanks for serving as well...I was in Iraq twice.
Logged

Offline choptop

  • Senior Member
  • ****
  • Posts: 2476
  • Extended cab fanatic
    • conversiontrucks
Re: 77 Cheyenne Stepside from Idaho
« Reply #8 on: October 02, 2010, 09:19:47 pm »
Welcome from West Texas and Thank you
Logged
76 C10 Choptop,76 C10 Swb
85 C10, 85 K10, 85 K20,86 C10,86 K10 (all extended cabs)
86 C30 extended crewcab

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: 77 Cheyenne Stepside from Idaho
« Reply #9 on: October 04, 2010, 09:50:18 am »
Welcome. Awesome ride. I hope they took good care of you.
Your pics are awesome with the flags, and get my nomination for the calendar.
« Last Edit: October 04, 2010, 10:31:14 am by Grim 82 »
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 77 Cheyenne Stepside from Idaho
« Reply #10 on: October 04, 2010, 01:13:10 pm »
Welcome, Truck looks great!
Logged

Offline ravinwolf

  • Newbie
  • Posts: 3
Re: 77 Cheyenne Stepside from Idaho
« Reply #11 on: October 04, 2010, 03:25:34 pm »
Quote from: Grim 82 on October 04, 2010, 09:50:18 am
Welcome. Awesome ride. I hope they took good care of you.
Your pics are awesome with the flags, and get my nomination for the calendar.
I put the flags on the truck cause my platoon is heading back to Iraq and since I can't go I wanted to show my support for them and I know their mission will not be a easy one! God Speed 116th Colt Platoon!!!!!
Logged

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: 77 Cheyenne Stepside from Idaho
« Reply #12 on: October 04, 2010, 03:43:44 pm »
I wish them a safe and speedy return.
Painting targets?
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.
Pages: [1]   Go Up
« previous next »