« previous next »
Pages: [1]   Go Down

Author Topic: Getting back into the swing of things!  (Read 5975 times)

Offline deluxe77

  • Newbie
  • Posts: 62
Getting back into the swing of things!
« on: February 22, 2011, 08:32:14 am »
It's been a long time since I've posted anything on here!  But I'm back with a couple new projects!  I had to retire the old 77 k10,  it was to far gone for me to bring back!  So I bought an 86 silverado and transplanted the 307 motor!  My original plan was to leave it stock but thanks to a very convincing friend I came across a drop kit that was in my price range!  So now it sits low, and will be Lowe in the back when I get my c notch for the back!

Logged

Offline deluxe77

  • Newbie
  • Posts: 62
Re: Getting back into the swing of things!
« Reply #1 on: February 22, 2011, 08:39:05 am »
During the process of working on the 86 I also acquired my second truck!  It is a 78 gmc Sierra that belonged to my stepdad!  He wanted to get rid of it but wanted to keep it in the family so I ended up with it!  My plans for it are to restore it closer to stock and when my daughter is old enough it will become her first vehicle!  I did rob the wheels off of it and put on the 86!  I have to finish installing the motor that my stepdad never got around too,  but it should be road worthy in just a weekends worth of work! 






The motor in the bed is a 350 that came with the truck!  I have a friend that is going to help me build a 383 stroked for the silverado out of it!
Logged

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: Getting back into the swing of things!
« Reply #2 on: February 22, 2011, 01:51:29 pm »
Sweet! I love double builds! I think the wheels from the 78 look better on the 86. Welcome back!
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline deluxe77

  • Newbie
  • Posts: 62
Re: Getting back into the swing of things!
« Reply #3 on: February 22, 2011, 01:56:54 pm »
The only problem with the wheel swap is that they rub when I turn!  I am going after work today to try a slightly thinner tire for the front!
Logged

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: Getting back into the swing of things!
« Reply #4 on: February 22, 2011, 02:10:10 pm »
Good call!
Logged
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Getting back into the swing of things!
« Reply #5 on: February 22, 2011, 08:36:42 pm »
     Welcome back, and nice trucks .
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline deluxe77

  • Newbie
  • Posts: 62
Re: Getting back into the swing of things!
« Reply #6 on: February 22, 2011, 08:44:53 pm »
Thanks!  I fixed my rubbing problem! I have 275 60 r15 on the back and 235 70 r15 on the front!
Logged

Offline deluxe77

  • Newbie
  • Posts: 62
Re: Getting back into the swing of things!
« Reply #7 on: March 30, 2011, 10:45:57 pm »
Update!  I got the 78 running tonight!  Sounds great but still have a few little minor tweaks before it's road worthy!  For some reason the throttle is sticking so it idles higher than it should until I unstick it!   I pulled it out on The street for a quick test drive and the drivers side breaks are locking up!  Buy for sitting parked for the last seven years I kind of expected things like this!  Got to dark for pictures will try again tomorrow!
Logged

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: Getting back into the swing of things!
« Reply #8 on: March 30, 2011, 10:50:28 pm »
Nice!
Logged

Offline deluxe77

  • Newbie
  • Posts: 62
Re: Getting back into the swing of things!
« Reply #9 on: March 31, 2011, 10:42:22 pm »
Well I finally got it!  The 78 gmc made it's first trip home on its own power in 7 years!





Logged
Pages: [1]   Go Up
« previous next »