« previous next »
Pages: [1]   Go Down

Author Topic: did GM not galvanize this area?  (Read 7409 times)

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
did GM not galvanize this area?
« on: March 17, 2011, 09:40:38 pm »
i put a new bulb in my cargo light and i can see i have some of that very light surface rust in between the inner and outer panel of my roof. is there anything i can do?
Logged

Offline topp

  • Frequent Member
  • **
  • Posts: 498
Re: did GM not galvanize this area?
« Reply #1 on: March 17, 2011, 09:56:54 pm »
Most of your truck is not galvanized.
Logged
'90 Suburban TBI 350

Offline Edahall

  • Frequent Member
  • **
  • Posts: 311
Re: did GM not galvanize this area?
« Reply #2 on: March 17, 2011, 10:04:17 pm »
Quote from: 87swb on March 17, 2011, 09:40:38 pm
i put a new bulb in my cargo light and i can see i have some of that very light surface rust in between the inner and outer panel of my roof. is there anything i can do?

Yes, spray some por-15 with a spray gun in there.
Logged
1990 ¾ ton 4x4 Chevy Suburban
-Cummins Diesel - 12 valve - factory rebuilt
-6 speed bullet proof manual transmission - NV5600
-Gear Vendors Overdrive
-Upgraded Holset HX-35 turbo
-NP205 iron transfer case
-3.73 gears
-2" Lift

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: did GM not galvanize this area?
« Reply #3 on: March 18, 2011, 07:54:10 am »
Only galvanizing I've ever see was on the front disc brake splash shields... :)
Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline topp

  • Frequent Member
  • **
  • Posts: 498
Re: did GM not galvanize this area?
« Reply #4 on: March 18, 2011, 07:55:42 am »
In '89 GM started galvanizing these trucks a bit.
Logged
'90 Suburban TBI 350

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: did GM not galvanize this area?
« Reply #5 on: March 18, 2011, 08:36:14 am »
There is a product called Spray-Galv in a rattle can by Seymour paints.  I'll see if I can get some more info on it and post it up.

http://www.seymourpaint.com/spray_galv.html  while finding it there are many others that offer the same type of coating.
« Last Edit: March 18, 2011, 08:41:46 am by zieg85 »
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: did GM not galvanize this area?
« Reply #6 on: March 18, 2011, 11:37:55 am »
You need to prevent oxygen and moisture from penetrating the unprotected area. Once oxygen and water gets in there any sheetmetal will start to rust. Air has moisture in it so just being exposed to damp air will rust unprotected sheet metal. There are so many products on the market now, just google "stop rust"
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: did GM not galvanize this area?
« Reply #7 on: March 18, 2011, 08:27:05 pm »
i'm talking about the wrong thing then, what ever they coat the metal underneath the truck with, it's gray looking. it should be in there. i'll try to spray something. thanks for the replies, i know i get a little obsessed about rust on here. just trying make it last. i'm beginning to believe there is no such thing as a rust free older chevy.
Logged

Offline Edahall

  • Frequent Member
  • **
  • Posts: 311
Re: did GM not galvanize this area?
« Reply #8 on: March 19, 2011, 12:07:46 am »
Yeah, I feel your frustration regarding rust.  Although rare, there's a few rust free older Chevy trucks out there such as my Suburban that spent its life in the California desert.  On the otherhand, my other Suburban (1982) spent its life in Washington state where it rains a lot and it's rusting from the inside out.  I've tried many times to deal with it but it keeps coming back with a stronger vengence.  It's now a lost cause so eventually, the drivetrain will be taken out and put into a newer vehicle.
Logged
1990 ¾ ton 4x4 Chevy Suburban
-Cummins Diesel - 12 valve - factory rebuilt
-6 speed bullet proof manual transmission - NV5600
-Gear Vendors Overdrive
-Upgraded Holset HX-35 turbo
-NP205 iron transfer case
-3.73 gears
-2" Lift

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: did GM not galvanize this area?
« Reply #9 on: March 21, 2011, 09:24:38 pm »
everything on my truck is solid except for a few palces in the windshield channel and back glass. no cab corner or rocker rust. only thing i figure is if its rusting from the inside out is because of condensation. heavy dew from overnight making it sweat on the inside of the panels.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18460
    • http://www.73-87chevytrucks.com
Re: did GM not galvanize this area?
« Reply #10 on: March 22, 2011, 03:54:24 pm »
Floor pans were galvanized in 1983.
Logged

Offline 87swb

  • Frequent Member
  • **
  • Posts: 426
Re: did GM not galvanize this area?
« Reply #11 on: March 22, 2011, 08:05:37 pm »
well i think it helped out a lot when they done that
Logged
Pages: [1]   Go Up
« previous next »