« previous next »
Pages: [1]   Go Down

Author Topic: 85k20 kick down ??  (Read 2490 times)

Offline tigwelder

  • Newbie
  • Posts: 83
85k20 kick down ??
« on: August 10, 2011, 06:52:17 am »
where does power come from for the kick down switch on 85 k20 with 400 turbo? switch is under dash near gas pedal.is this fused?
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 85k20 kick down ??
« Reply #1 on: August 10, 2011, 10:09:17 am »
¿Qué? ???its just a cable from the carb to the trans aint it?
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: 85k20 kick down ??
« Reply #2 on: August 10, 2011, 01:47:48 pm »
Any switched 12V will work, not sure if they were originally fused though.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline Psycho71

  • Registered Users
  • *
  • Posts: 239
Re: 85k20 kick down ??
« Reply #3 on: August 11, 2011, 10:45:27 pm »
Not sure where it comes from on mine, never looked. I would think any switched wire would work just fine, and it certainly wouldn't hurt to have it fused. At worst, the fuse blows and it won't kick down? Crazier things have happened.

And Irish, the TH400 uses an electric kickdown under the dash, as opposed to the th350 which is cable operated at the carb.
Logged
There are two tools needed, duct tape and WD40. If it moves and shouldn't, use the duct tape. If it doesn't move and should, use the WD 40.
Pages: [1]   Go Up
« previous next »