Author Topic: How do you remove the key knock-out plugs? (Read 4636 times)

got2haul · « **on:** August 13, 2011, 08:04:32 pm »

I installed a new original key cylinder with keys. The keys have the knock-out
plugs and I'd like to remove them. How is this done without damaging the key?

80stepsideguy · « **Reply #1 on:** August 13, 2011, 08:21:36 pm »

Block of wood under the key and use a hammer and a flat screwdriver may work..

thanks
pat

Blazin · « **Reply #2 on:** August 13, 2011, 10:19:28 pm »

Place the knock out over the vise opening and punch it out with a hammer, and punch.

VileZambonie · « **Reply #3 on:** August 13, 2011, 10:51:34 pm »

Flat screw driver and give it whack. If you have a vice, open the jaws slightly and pop it through

got2haul · « **Reply #4 on:** August 14, 2011, 05:00:51 pm »

Quote from: VileZambonie on August 13, 2011, 10:51:34 pm

Flat screw driver and give it whack. If you have a vice, open the jaws slightly and pop it through

Worked like a champ! Thanks!

News:

Author Topic: How do you remove the key knock-out plugs? (Read 4636 times)

got2haul

How do you remove the key knock-out plugs?

80stepsideguy

Re: How do you remove the key knock-out plugs?

Blazin

Re: How do you remove the key knock-out plugs?

VileZambonie

Re: How do you remove the key knock-out plugs?

got2haul

Re: How do you remove the key knock-out plugs?