« previous next »
Pages: [1]   Go Down

Author Topic: Swamp 350TH to 400TH  (Read 2439 times)

Offline 7Stepside8

  • Newbie
  • Posts: 11
Swamp 350TH to 400TH
« on: May 13, 2012, 11:13:58 pm »
Will I be able to just put a 400TH from an RV right into my truck with a 350TH and have no issues?
Logged
Always Something..

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: Swamp 350TH to 400TH
« Reply #1 on: May 13, 2012, 11:41:01 pm »
You're going to have to do some modifications.
The amount of modifications will depend upon whether it is a 2wd or 4wd.
Either way, the first item to come to mind is the electric kickdown switch (TH400) versus cable operated kickdown (TH350).
Logged
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline 7Stepside8

  • Newbie
  • Posts: 11
Re: Swamp 350TH to 400TH
« Reply #2 on: May 14, 2012, 04:51:39 pm »
It's 2wd.. Swamping Transmissions is new to me so Im hoping to get a list of things I need before I do it so I can do it quick.
Logged
Always Something..

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Swamp 350TH to 400TH
« Reply #3 on: May 15, 2012, 06:53:07 am »
output splines are probably going to be different. You will need the bracket, and switch off the gas pedal assembly for the electric kickdown. You will need to wire it up. Move the cross member most likely, probably change the length of the drive shaft.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs
Pages: [1]   Go Up
« previous next »