« previous next »
Pages: [1]   Go Down

Author Topic: Engine Confusion  (Read 3737 times)

Offline 78chevyshortbed

  • Newbie
  • Posts: 14
  • Newbie
Engine Confusion
« on: December 12, 2012, 03:19:29 pm »
on my motor it is stamped as a GM 14010207 and CFD 207. anybody have any knowledge towards this. Need help on whether its a 350 or 305. i did research and the GM 14010207 states that it is a 350. but the CFD 207 states that the motor is a 305. Help?
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Engine Confusion
« Reply #1 on: December 12, 2012, 06:11:59 pm »
     Where are you getting the info that says its a 305 ?
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline 78chevyshortbed

  • Newbie
  • Posts: 14
  • Newbie
Re: Engine Confusion
« Reply #2 on: December 12, 2012, 06:30:22 pm »
I researched the CFD 207 and it says it's a 305.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19167
Re: Engine Confusion
« Reply #3 on: December 12, 2012, 06:32:11 pm »
350
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 78chevyshortbed

  • Newbie
  • Posts: 14
  • Newbie
Re: Engine Confusion
« Reply #4 on: December 12, 2012, 06:34:30 pm »
Now all I'm seeing while I'm researching is that it's a 350.
Logged

Offline 78chevyshortbed

  • Newbie
  • Posts: 14
  • Newbie
Re: Engine Confusion
« Reply #5 on: December 12, 2012, 07:01:30 pm »
okay, if you go on nastyz28.com and click the link thing that says, QUICKLY IDENTIFY A CHEVY ENGINE CLICK HERE, and go to the suffix codes and fine CFD and it says its a 305. if i go on this sight actually, just 73-87.com and go to engine identification and find the GM 14010207 it says its a 350???
« Last Edit: December 12, 2012, 07:07:25 pm by 78chevyshortbed »
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Engine Confusion
« Reply #6 on: December 12, 2012, 11:09:57 pm »
     Are both of these numbers stamped on the engine ?  Not the head, and where are you finding the numbers Exactly on the engine ?
     Behind the drivers side below the head on the block is where you should be looking.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: Engine Confusion
« Reply #7 on: December 13, 2012, 12:48:06 pm »
You cannot go by the suffix code, it is a 350.  Engine casting number trumps whatever is on the machined pad.  Is the Engine code stamped there?
Logged
Pages: [1]   Go Up
« previous next »