« previous next »
Pages: [1]   Go Down

Author Topic: np205 question  (Read 3452 times)

Offline Big Daddy

  • Newbie
  • Posts: 18
np205 question
« on: August 23, 2013, 07:56:46 pm »
Will an input shaft from a 350 turbo/205 transfer case (1980 slip yoke 205) fit into a 205 that has the 10 spline input shaft?  I would prefer to swap the parts that I have before I go out and buy an adapter I might not need
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: np205 question
« Reply #1 on: August 24, 2013, 12:09:55 am »
cant say for sure about the input shaft, but i know you can swap output shafts. so i would assume its the same, since the 10 spline and 27 spline use the same input shaft bearing
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: np205 question
« Reply #2 on: August 28, 2013, 08:36:35 pm »
Yes you should be alright.

The 205s from a Turbo 400 had a larger input bearing, but the 205 case housing for the TH350, and SM465 applications were identical.
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout
Pages: [1]   Go Up
« previous next »