« previous next »
Pages: [1]   Go Down

Author Topic: Cut floor to lower seats?  (Read 10765 times)

Offline cali74shorty

  • Newbie
  • Posts: 8
  • Newbie
Cut floor to lower seats?
« on: April 01, 2015, 04:17:50 pm »
Hey,

I could not find any threads on cutting the floor to lower the seats in the cab. I have plans to remove both gas tanks and go with a fuel cell. Has anyone done this and have picture so I could get an idea of how to do it? Thanks for any information
Logged

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: Cut floor to lower seats?
« Reply #1 on: April 01, 2015, 04:18:49 pm »
Its possible but why do you want to lower the seats? I mean unless your 7 feet tall but then you run into leg room issues.
Logged

Offline cali74shorty

  • Newbie
  • Posts: 8
  • Newbie
Re: Cut floor to lower seats?
« Reply #2 on: April 01, 2015, 04:29:20 pm »
Well I'm 6'-7". I put bucket seats in it but it is still too tall. I put a lot of thought into it and for how long I plan on keeping the truck I want to be comfortable in it. I have looked at the procar set up but I believe that would still be too tall for me.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18468
    • http://www.73-87chevytrucks.com
Re: Cut floor to lower seats?
« Reply #3 on: April 01, 2015, 10:04:40 pm »
Logged

Offline morrow07

  • Newbie
  • Posts: 46
Re: Cut floor to lower seats?
« Reply #4 on: April 02, 2015, 12:31:41 am »
I have the Procars, and they sit way too high. I'm 6'1", and I feel as if I'm on top of the truck. I'm in the process of cutting down the brackets and rewelding them. I'll post pics when complete.

Sent from my C771 using Tapatalk 2
Logged
77 Cheyenne - 406ci 11:1, Fitech Mean Street 800, Performer RPM Air Gap, Super Sucker Spacer, Sportsman II heads, Harland Sharp 1.6 roller rockers, Hooker Super Comps, Spintech Super Pro Street 9000's, TH350 3000 stall, 12 bolt w/Auburn Pro Series 3.73

Offline cali74shorty

  • Newbie
  • Posts: 8
  • Newbie
Re: Cut floor to lower seats?
« Reply #5 on: April 02, 2015, 01:41:34 pm »
@morrow07 I would love to see how that comes out!! Please keep me posted. Also @Captkaos that is what I am looking for. I would like to see a well done seat swap with step by step and to see where they cut. I have seen that post before. I just don't think there are too many people doing it and I don't want to screw up my baby. I would just like to see every option before i start cutting  :-\ :-\
Logged

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: Cut floor to lower seats?
« Reply #6 on: April 02, 2015, 02:21:09 pm »
Quote from: cali74shorty on April 02, 2015, 01:41:34 pm
@morrow07 I would love to see how that comes out!! Please keep me posted. Also @Captkaos that is what I am looking for. I would like to see a well done seat swap with step by step and to see where they cut. I have seen that post before. I just don't think there are too many people doing it and I don't want to screw up my baby. I would just like to see every option before i start cutting  :-\ :-\

Here is another example. .. http://www.gmsquarebody.com/forum/showthread.php?t=375
Logged

Offline cali74shorty

  • Newbie
  • Posts: 8
  • Newbie
Re: Cut floor to lower seats?
« Reply #7 on: April 02, 2015, 04:15:56 pm »
That is a great write up! Thank you for the link. I appreciate the help and advice
Logged

Offline roundhouse

  • Senior Member
  • ****
  • Posts: 1474
  • Newbie
Re: Cut floor to lower seats?
« Reply #8 on: April 03, 2015, 06:49:28 am »
Theres lots of bucket seats with low bottomsthat wouldn't require cutting the floor

Look in cars
Miata.  Mustang  Fiero etc


Sent from my iPhone using Tapatalk
Logged

Offline FlatBlack77

  • Junior Member
  • ***
  • Posts: 894
  • Cheap Fast Reliable - Pick 2
Re: Cut floor to lower seats?
« Reply #9 on: April 03, 2015, 07:06:48 am »
civics, integras, and preludes aswell
Logged
"When you are a hammer, everything looks like a nail"
'77 C/10 - 350/350 mild street motor
Pages: [1]   Go Up
« previous next »