« previous next »
Pages: [1]   Go Down

Author Topic: Gauge Bulb Cap/Socket (PC194?)  (Read 5369 times)

Offline IdahoMan

  • Registered Users
  • *
  • Posts: 211
  • Newbie
Gauge Bulb Cap/Socket (PC194?)
« on: June 08, 2015, 03:32:00 pm »

Hello.

I am behind my inst cluster. I need a few of the little twist-in cap/sockets that hold and connect the bulb to the PCB.

At auto stores would it be called part number "PC194"? Does that fit our trucks? Can I find OEM, or does it really matter?
Logged

Online bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6600
Re: Gauge Bulb Cap/Socket (PC194?)
« Reply #1 on: June 08, 2015, 05:55:33 pm »
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Gauge Bulb Cap/Socket (PC194?)
« Reply #2 on: June 08, 2015, 05:58:39 pm »
You can buy LED versions too on eBay
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline pneuner750

  • Newbie
  • Posts: 37
  • Newbie
Re: Gauge Bulb Cap/Socket (PC194?)
« Reply #3 on: June 16, 2015, 03:56:39 pm »
Don't go with led! They require a second ground! I know, I tried them.

Sent from my SM-G900V using Tapatalk

Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Gauge Bulb Cap/Socket (PC194?)
« Reply #4 on: June 16, 2015, 08:37:03 pm »
Did you turn the bulb around?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Gauge Bulb Cap/Socket (PC194?)
« Reply #5 on: June 17, 2015, 08:53:54 am »
Quote from: VileZambonie on June 16, 2015, 08:37:03 pm
Did you turn the bulb around?
theres prob a bunch of people facepalming themselves right now
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: Gauge Bulb Cap/Socket (PC194?)
« Reply #6 on: June 17, 2015, 11:35:53 am »
Irish is on a roll with the jokes. Haha
Logged
LTZ Cheyenne C20

Offline Chuck Step-a-side

  • Registered Users
  • *
  • Posts: 136
  • Newbie
Re: Gauge Bulb Cap/Socket (PC194?)
« Reply #7 on: June 18, 2015, 07:01:43 am »
Do go with LED. I have done my complete gauge cluster in deep purple LED and everything works perfectly. The thing about LED is that it is one way install. If it does't work  the first time you put it on, then take out and turn it 180 degrees and reinstall. Highly recommended painting the rear housing and back of front gauge cover bright silver to help reflect the light everywhere. I will post a picture later of my gauge cluster.
Logged

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: Gauge Bulb Cap/Socket (PC194?)
« Reply #8 on: June 18, 2015, 09:51:16 am »
Quote from: Chuck Step-a-side on June 18, 2015, 07:01:43 am
Do go with LED. I have done my complete gauge cluster in deep purple LED and everything works perfectly. The thing about LED is that it is one way install. If it does't work  the first time you put it on, then take out and turn it 180 degrees and reinstall. Highly recommended painting the rear housing and back of front gauge cover bright silver to help reflect the light everywhere. I will post a picture later of my gauge cluster.
Second on painting the housing and reflector plate. I did just the reflector plate on mine with rattle can chrome and it was a huge difference.
Logged
LTZ Cheyenne C20
Pages: [1]   Go Up
« previous next »