« previous next »
Pages: [1]   Go Down

Author Topic: 80 model k10 how to straighten steering wheel  (Read 7363 times)

Offline chevybones87

  • Newbie
  • Posts: 18
  • Newbie
80 model k10 how to straighten steering wheel
« on: November 13, 2015, 12:22:44 pm »
Hey guys I'm new to the club- Allen. From. Statesville NC...
 I've got my hands on a 80 model k10 its got some kind of aftermarket grant style steering wheel and its crooked as all get out.. How do I fix this its driving me crazy..thanks fellas
Logged

Offline chevybones87

  • Newbie
  • Posts: 18
  • Newbie
Re: 80 model k10 how to straighten steering wheel
« Reply #1 on: November 13, 2015, 12:23:42 pm »
Straighten ^^^^
Logged

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: 80 model k10 how to straighten steering wheel
« Reply #2 on: November 13, 2015, 12:28:20 pm »
It depends on where it isn't straight.

Usually it falls to the drag link. Look behind the driver tire and you'll see a sleeve connected by two joints. Adjust this sleeve to  move the steering wheel.

Little goes a long way.
Logged

Offline chevybones87

  • Newbie
  • Posts: 18
  • Newbie
Re: 80 model k10 how to straighten steering wheel
« Reply #3 on: November 13, 2015, 12:31:45 pm »
Thanks ill definitely do that
Logged

Offline 1967KaiserM715

  • Junior Member
  • ***
  • Posts: 914
  • 1985 GMC K1500 w/ 6.5 TD
Re: 80 model k10 how to straighten steering wheel
« Reply #4 on: November 13, 2015, 04:38:56 pm »
another option is to re-index the wheel on the shaft, normally just a nut and wheel puller needed-don't know about these trucks haven't pulled one apart before
Logged
Current Vehicles:1985 GMC K10(Daily) 1991 GMC K2500(Daily) 1975 Beetle(not running) 1985 Mercedes 300D(not running) 1952 M35    1967 M715(not running)
 1986 Chevy K30(under repair)

Offline enaberif

  • Junior Member
  • ***
  • Posts: 810
Re: 80 model k10 how to straighten steering wheel
« Reply #5 on: November 13, 2015, 05:45:38 pm »
Quote from: 1967KaiserM715 on November 13, 2015, 04:38:56 pm
another option is to re-index the wheel on the shaft, normally just a nut and wheel puller needed-don't know about these trucks haven't pulled one apart before

No! Do not do this. Do it properly. By re-indexing the wheel anytime you do an alignment or front end work your wheel is going to be of again.
Logged

Offline 1967KaiserM715

  • Junior Member
  • ***
  • Posts: 914
  • 1985 GMC K1500 w/ 6.5 TD
Re: 80 model k10 how to straighten steering wheel
« Reply #6 on: November 13, 2015, 07:06:27 pm »
 Sorry, I should have been a little clearer, if alignment is correct and steering box centered, another option is to reindex the wheel. Being aftermarket it could be a spline or couple off


Sent from my iPhone using Tapatalk
Logged
Current Vehicles:1985 GMC K10(Daily) 1991 GMC K2500(Daily) 1975 Beetle(not running) 1985 Mercedes 300D(not running) 1952 M35    1967 M715(not running)
 1986 Chevy K30(under repair)

Offline Dr_Snooz

  • Junior Member
  • ***
  • Posts: 684
  • "I like to take hammers, and just break stuff"
Re: 80 model k10 how to straighten steering wheel
« Reply #7 on: November 13, 2015, 08:25:51 pm »
Presumably the wheel is not centered when the truck is driving straight down the road. In that case, simply re-positioning the steering wheel on the column spline-shaft would be the right way to do it. I have a Grant and with old sloppy steering, it's easy to get it off a few teeth when installing. My Grant sits crooked as well. No need for a wheel puller on mine. It just slips right off.
Logged
1989 Chevy Suburban V-2500, 5.7L, TH400

1990 Chevy C-3500 Ext. Cab, 7.4L, 3L80

2009 Chevy Silverado 1500 WT 4WD, 4.8L, 4L60

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19193
Re: 80 model k10 how to straighten steering wheel
« Reply #8 on: November 13, 2015, 08:47:10 pm »
Don't over complicate things, you go all the way to the right and all the way to the left. The half way point is the middle. Do not remove and reposition it unless someone improperly installed the wheel. As said by enabarif you would adjust the drag link to center the steering wheel.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline chevybones87

  • Newbie
  • Posts: 18
  • Newbie
Re: 80 model k10 how to straighten steering wheel
« Reply #9 on: November 14, 2015, 07:16:22 am »
I will check it all out today guys.. I would just jump straight to the drag link but, looking at all of the previous owners work there is really no telling if he installed it correctly or not. All of the horn stuff is in the glove box so I need to do that anyway...thanks again
Logged

Offline Dr_Snooz

  • Junior Member
  • ***
  • Posts: 684
  • "I like to take hammers, and just break stuff"
Re: 80 model k10 how to straighten steering wheel
« Reply #10 on: November 15, 2015, 08:37:57 pm »
LOL. My horn is compromised too.
Logged
1989 Chevy Suburban V-2500, 5.7L, TH400

1990 Chevy C-3500 Ext. Cab, 7.4L, 3L80

2009 Chevy Silverado 1500 WT 4WD, 4.8L, 4L60
Pages: [1]   Go Up
« previous next »