Author Topic: oil dipstick question  (Read 2312 times)

Offline kingmu

  • Newbie
  • Posts: 19
oil dipstick question
« on: August 18, 2005, 02:50:00 AM »
Hi everyone,

So I've been working on this engine building project since January and now I'm getting down to the devilish details.

There is this oil dipstick guide that fits flush into the block and extends into the oil pan area. But now the tube that holds the actual dipstick can not fit in to this guide. I don't remember how it was before. Any help?

Thanks!
Sam


Offline roundedline

  • Administrator
  • Senior Member
  • *****
  • Posts: 2228
Re: oil dipstick question
« Reply #1 on: August 18, 2005, 09:39:00 AM »
The guide piece should be part of the dipstick tube.  There should be a bevel on the tube that limits the depth of the tube.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project


Offline TRUCK6DRIVER

  • Newbie
  • Posts: 73
Re: oil dipstick question
« Reply #2 on: August 21, 2005, 09:44:00 PM »
Yeah what he said. It is broken off in the block.>:  Get a new dip stick. If the oil pan is on it you can thread a bolt in the tube and either pry it out or use a slide hammer to snatch it out.

RH