Author Topic: Recommend fly by wire LS pedal for '85 C10  (Read 110 times)

Offline dogfacedsoldier

  • Newbie
  • Posts: 9
  • Tax Eater
Recommend fly by wire LS pedal for '85 C10
« on: September 14, 2018, 07:41:39 AM »

O.K., LQ4 is installed and running.  The pedal that I picked up from second hand came out of a Mustang conversion (my LQ4 conversion engine and tranny came out of a wrecked 1990s Mustang (no joke).  I don't care for the pedal. 

For the guys who have installed a fly by wire LS swap, which pedal did you use? 

I am 6'3", so something a little closer to the firewall wouldn't hurt. 

Offline ehjorten

  • Junior Member
  • ***
  • Posts: 937
Re: Recommend fly by wire LS pedal for '85 C10
« Reply #1 on: September 14, 2018, 08:26:53 AM »
Use the Chevy truck pedal with the 6.5 Diesel!  It bolts right up to the firewall in the stock location!!!  You only need to swap 2 pins in the connector at the pedal for it to work.  I got mine for a 1999 6.5 TD.

Check-out my LS thread here: http://forum.73-87chevytrucks.com/smforum/index.php?topic=34079.30

Start at reply #43 for the DBW pedal stuff.
« Last Edit: September 14, 2018, 08:32:40 AM by ehjorten »
-Erik-
1991 V3500 - Gen V TBI 454, 4L80E, NP205, 14 bolt FF, D60, 8" Lift on 35s
1977 K20 Silverado - 350, THM350, NP203, 14 bolt FF, D44, Stock Lift on 31s
1969 Chevelle Malibu Sport Coupe - EFI350, THM350
1968 Chevrolet Step-side Pickup - 300HP L6

Offline Rapid Roy

  • Frequent Member
  • **
  • Posts: 369
  • Euless, Texas
Re: Recommend fly by wire LS pedal for '85 C10
« Reply #2 on: September 14, 2018, 09:03:27 AM »
Welcome.
1974 Cheyenne 10 LWB 350/TH350/AC/4 BBL Quadrajet