Author Topic: LS swap Gurus  (Read 4711 times)

Offline jon316

  • Newbie
  • Posts: 36
  • Newbie
Re: LS swap Gurus
« Reply #30 on: June 19, 2020, 07:00:43 PM »
Ok Iíll check them! Thanks! Iíll be doing some nice wilwood and new rotors so Iíll make sure theyíre working properly.


Sent from my iPhone using Tapatalk

Offline jon316

  • Newbie
  • Posts: 36
  • Newbie
Re: LS swap Gurus
« Reply #31 on: June 20, 2020, 09:15:55 AM »
So I got this D52 Wilwood kit specifically for the c10....and also a set of rotors. First the rotors are too big, not even the bearings fit. So I said screw it need the truck to run already Iíll run the current rotors for now. And now the brake line bolt doesnít match! What a mission. Any help?


Iím about to just put everything back and rebuild that one caliper. Never dealt with so much issues on a truck. But Iíve worked on mostly OBS trucks and NBS trucks.








Sent from my iPhone using Tapatalk

Offline jon316

  • Newbie
  • Posts: 36
  • Newbie
Re: LS swap Gurus
« Reply #32 on: June 20, 2020, 09:30:02 AM »
Iím seeing jb1 and jb3 and jb5.... I have j50? Not sure what rotors and calipers I should use!




Sent from my iPhone using Tapatalk

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 5715
Re: LS swap Gurus
« Reply #33 on: June 20, 2020, 04:45:50 PM »
Based on the VIN and J50 vacuum power brake code your truck was constructed with JB3 brakes.

Brake Tech, what do all the numbers mean..
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline jon316

  • Newbie
  • Posts: 36
  • Newbie
Re: LS swap Gurus
« Reply #34 on: June 20, 2020, 05:03:25 PM »
Got it, went to oreillys and stuck with the oem stuck. Matched the best to jb1/jb3 so thatís what I went with and worked out. Thanks!!


Sent from my iPhone using Tapatalk