« previous next »
Pages: [1]   Go Down

Author Topic: Using 87 C20 frame for a 87 V20  (Read 1708 times)

Offline dc7432

  • Newbie
  • Posts: 60
  • Newbie
Using 87 C20 frame for a 87 V20
« on: September 08, 2025, 09:28:22 pm »
Our 87 V20 (4wd) frame needs to be replaced and we found a 87 C20 (2wd) frame. Looking for advice on what modifications the C20 will need to convert to 4wd. Our plan is to use everything on the V20 just need a frame, thanks in advance.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18469
    • http://www.73-87chevytrucks.com
Re: Using 87 C20 frame for a 87 V20
« Reply #1 on: September 10, 2025, 09:28:41 am »
Generally speaking every component for the engine mounting and trans mounting will need to be transfered.
The front and rear suspension mounting will also need to be transfered over.

Basically, in short without granular detail, you are going to strip both frames down to the frame rails and transfer them over being mindful of location
Logged

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2739
  • Old Goof
Re: Using 87 C20 frame for a 87 V20
« Reply #2 on: Today at 02:30:24 pm »
Take lots of photos before starting  ::) :'( ;)
Logged
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction
Pages: [1]   Go Up
« previous next »