Author Topic: whiper troubles again  (Read 43 times)

Offline NCali

  • Registered Users
  • *
  • Posts: 125
whiper troubles again
« on: June 17, 2026, 06:04:06 pm »

I wrote the following thread some tine ago. then I changed the switch and the wiper motor and that fixed thee problem until now. Driving down the road the wipers came on and would not shut off. To get home I unplugged wires 17, 18 and 19, 3 and 4. today I plugged those wires back in and the delay module instantly got hot. unplugged the delay module and tried to put the connectors together but the wipers didn't run. with the switch in the off position I no have power on #4 , 17,18 and 19. my next step will be to separate the delay module to see if I can find a short
 or another delay module
any thoughts?



73-87chevytrucks.com
* 1
Welcome, Guest. Please login or register.

Login with username, password and session length
 
News:

You MUST have a current 73-87ChevyTrucks.com "Site Supporter Subscription" to barter, buy, sell, solicit, or otherwise trade any items, vehicles, parts, or services on the Forum!

For details, review Registration and Posting Agreement - Classified Restrictions.

    Home
    Forum
    Store
    Help
    Search
    Gallery
    Login
    Register


    73-87chevytrucks.com »
    73-87 Chevy _ GMC Trucks »
    Electrical »
    windshield wiper repair

« previous next »

    Print

Pages: [1]   Go Down
Author Topic: windshield wiper repair  (Read 18537 times)
Offline NCali

    Registered Users
    *
    Posts: 124

windshield wiper repair
« on: September 15, 2024, 05:00:24 pm »
I have a 1987 2wd 1/2 ton with the pulse wiper system. switch on the column washer motor behind the tank. Problem is the wipers wont shut off. At times I can get  them to stop by twisting the switch back and forth.  My motor has 2 connectors, one for  the motor and one for the park position. with the connector pulled out of the park position, I checked the contacts with an ohm  meter and the contact is open.  with the key on I have 12 volts on the white wire of the park connector and 12 volts on all three wires going to the motor. the wipers have the low, high and intermittent functions when selected on the switch
thank you for any assistance, btw I have read your wiper section and ended up confused
Logged
Black Labs Matter
Offline VileZambonie

    Global Moderator
    Senior Member
    *****
    Posts: 19233

Re: windshield wiper repair
« Reply #1 on: September 15, 2024, 05:35:38 pm »
Start by following the attached instructions.

* Wiper 1.JPG (190.28 kB, 1624x866 - viewed 4053 times.)

* Wiper 2.JPG (123.9 kB, 1151x856 - viewed 4069 times.)
Logged
,                           ___
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Offline NCali

    Registered Users
    *
    Posts: 124

Re: windshield wiper repair
« Reply #2 on: September 24, 2024, 08:18:22 pm »
VileZambonie : thank you for the assistance with my wipers. I installed a new motor and that fixed it. sure saved me alot of time  and money not throwing parts at it
Logged
Black Labs Matter
Offline VileZambonie

    Global Moderator
    Senior Member
    *****
    Posts: 19233

Re: windshield wiper repair
« Reply #3 on: October 03, 2024, 05:42:09 pm »
Glad to hear  8)
Logged
,                           ___
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Offline NCali

    Registered Users
    *
    Posts: 124

Re: windshield wiper repair
« Reply #4 on: October 07, 2024, 05:02:18 pm »
To continue:  installed brand new wiper motor with new bushings and the old solid ground strap (cleaned up) on 3 October . It is now
the 7th of October , driving down the road, the wiper switch on the turn signal stalk in the off position, The wipers begin to cycle on  the low speed  delay. I can shut them off and the wipers w ill park. The wiper system is simple on this truck with only the switch stalk and the delay module in the circuit or a better ground
1987 1/2 ton 2wd 305 tbi
Logged
Black Labs Matter
Online bd

    Global Moderator
    Senior Member
    *****
    Posts: 6674

Re: windshield wiper repair
« Reply #5 on: October 08, 2024, 04:48:20 pm »
How did you shut the wipers off the first time the symptoms occurred?  Is the problem recurring or was it a one-time occurrence?  If it keeps manifesting, remove the pulse module from the circuit and plug the switch harness directly into the dash harness.  That will eliminate the module as a variable.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

    Print

Pages: [1]   Go Up
« previous next »

    73-87chevytrucks.com »
    73-87 Chevy _ GMC Trucks »
    Electrical »
    windshield wiper repair

Jump to: 

    73-87chevytrucks.com Copyright 2003
    SMF 2.0.15 | SMF © 2017, Simple Machines
    SimplePortal 2.3.5 © 2008-2012, SimplePortal
    SMFAds for Free Forums
    XHTML RSS WAP2


Black Labs Matter