« previous next »
Pages: [1]   Go Down

Author Topic: electri windows  (Read 3669 times)

Offline mikewb

  • Registered Users
  • *
  • Posts: 167
electri windows
« on: June 27, 2007, 02:47:51 pm »
on an electric door does anybody know how i can wire it to work if my truck didnt come with power windows. as in which wires are for the drivers door and what does what.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19181
Re: electri windows
« Reply #1 on: June 27, 2007, 03:02:18 pm »
you can either run a donor harness or run the wires yourself. Just print out the schematic and then physically measure out what you'll need.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline mikewb

  • Registered Users
  • *
  • Posts: 167
Re: electri windows
« Reply #2 on: June 27, 2007, 03:09:33 pm »
where should i run the wires to?
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: electri windows
« Reply #3 on: June 27, 2007, 05:24:36 pm »
As in where to power them from?  The fuse panel.  If you find one in the salvage yard, you can pull the power window/lock harness out.  It is an additional circuit for these trucks.
Logged

Offline mikewb

  • Registered Users
  • *
  • Posts: 167
Re: electri windows
« Reply #4 on: June 28, 2007, 01:43:23 pm »
the orange, blue , and black wires go to the drivers door. which ones go to power and which ones to ground?
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: electri windows
« Reply #5 on: June 28, 2007, 02:23:06 pm »
76 Pink goes to the fuse box, 150 black goes to the bus bar ground.  (It is on the drivers side a pillar behind the dash.)
Logged
Pages: [1]   Go Up
« previous next »