Author Topic: 84 3/4 ton 2wd need to lift the nose a bit  (Read 4496 times)

Offline Heffa

  • New Users
  • Posts: 1
84 3/4 ton 2wd need to lift the nose a bit
« on: August 20, 2008, 02:15:11 am »
I hate for my first post to be a question but I need some help. I want to level my 3/4 ton 2wd by going up in the nose. I have looked and looked and all I can find is a Rancho kit that lift's the whole truck 1 1/2 inches which will still not sit level. Is there a place that I could get just a  1 1/2 or so front spring? The back is 35" to the fender and the front is 33 3/4.  Thanks and Hi guys!!!!

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 84 3/4 ton 2wd need to lift the nose a bit
« Reply #1 on: August 20, 2008, 09:45:38 am »
If the springs are original, you can get new 3/4T springs and that will lift it up some.  1T truck springs will have a little more height.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: 84 3/4 ton 2wd need to lift the nose a bit
« Reply #2 on: August 20, 2008, 10:03:27 am »
Use an add a leaf
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: 84 3/4 ton 2wd need to lift the nose a bit
« Reply #3 on: August 20, 2008, 10:05:52 am »
It's a 4x2 Vile...  Or are you talking about the rear?

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: 84 3/4 ton 2wd need to lift the nose a bit
« Reply #4 on: August 20, 2008, 10:15:14 am »
Good call! lol
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10