Author Topic: Getting too old for bouncing  (Read 2463 times)

Offline ehjorten

  • Senior Member
  • ****
  • Posts: 1207
Re: Getting too old for bouncing
« Reply #15 on: May 09, 2023, 03:02:17 PM »
One thing that is different about the Bilstein rear shocks for our trucks, is that the frame mount is incorporated into the shock. I thought that kind of weird, but after I got over that, I like it. My right, rear frame mount was messed-up and loose. The nut on it was really hard to get off. With the new mounts you only have one nut to tighten on the top end and it is a nice flanged nut. Whenever you replace them you basically get a new shock mount with it.

I did have to grind down the lower sleeve a bit to get them to fit inside my axle mounts. They were a little bit wide and it was easier to grind down some length than try to spread the mounts on my axle.
« Last Edit: May 09, 2023, 03:03:52 PM by ehjorten »
-Erik-
1991 V3500 - Gen V TBI 454, 4L80E, NP205, 14 bolt FF, D60, 8" Lift on 35s
1977 K20 Silverado - 350, THM350, NP203, 14 bolt FF, D44, Stock Lift on 31s
1969 Chevelle Malibu Sport Coupe - EFI350, THM350
1968 Chevrolet Step-side Pickup - 300HP L6