73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: murraygmc on January 12, 2009, 08:50:33 pm

Title: warren locking hubs
Post by: murraygmc on January 12, 2009, 08:50:33 pm: any one know Ware to buy the Allen head bolts that keeps the switch in place ? my local auto store said they used to stock them but the compiny went under i need about 5 thanks. reason i need them is when i replaced the upper and lower ball joints and changed out the wheel joints and i also put new barrings under it they were broke off ! What a weekend so now all i need to do is replace the tie rod ends and drag link an then ill basically have the steering completely gone through. i figured if im going to replace one thing ill make shure its all good thanks again
Title: Re: warren locking hubs
Post by: joesgarage71 on January 12, 2009, 08:56:50 pm: Take a spare bolt with you to a Fastenal
http://www.fastenal.com/web/locations.ex?action=search&zip=47553&state=IN
Title: Re: warren locking hubs
Post by: Blazin on January 12, 2009, 09:31:44 pm: Any place that had a good quality hardware selection should have something in stock. I have a huge bag of stainless Phillips head screws that are the same size and thread. I have used them in the past. I have also used a drill to open up the inset hole so they don't seize up as easily again.
Title: Re: warren locking hubs
Post by: murraygmc on January 12, 2009, 09:43:22 pm: thanks Joe and blazen i tell ya what the work iv done to the truck this weekend was a wealth of experience it was kinda fun pressing the ball joints out and using a pickle fork
Title: Re: warren locking hubs
Post by: VileZambonie on January 13, 2009, 09:19:30 am: Just go to their website or get some from the dealer. They should be the same.

http://www.streetsideauto.com/products.asp?ptid=5332&brand=BCSQ&series=Hub%20Fastener%20Kit&partnumber=34595&Skip=True&LookupType=NON&Reset=True

or

http://www.streetsideauto.com/products.asp?ptid=5332&brand=BCSQ&series=Hub%20Fastener%20Kit&partnumber=34594&Skip=True&LookupType=NON&Reset=True

depending on what you have.
Title: Re: warren locking hubs
Post by: murraygmc on January 13, 2009, 04:47:50 pm: its a 85 how do i know witch ones i have
Title: Re: warren locking hubs
Post by: joesgarage71 on January 14, 2009, 08:41:09 pm: Quote from: murraygmc on January 13, 2009, 04:47:50 pm
its a 85 how do i know witch ones i have

Thats why you take a spare (to match it up) with you to the nut and bolt suppiler. The fastenal store is 13 miles away from you. Washington In.
Title: Re: warren locking hubs
Post by: murraygmc on January 14, 2009, 08:46:48 pm: yep got them!!! ;D ; my buddy has a machine shop he gave me a hand full so im going to replace all of them ;)
Title: Re: warren locking hubs
Post by: murraygmc on January 15, 2009, 01:05:19 pm: think theese will work ?
Title: Re: warren locking hubs
Post by: murraygmc on January 15, 2009, 01:06:19 pm: oh that didnt work
Title: Re: warren locking hubs
Post by: VileZambonie on January 15, 2009, 05:11:52 pm: Those invisible bolts might work if you use the force to put them in. (http://www.clipartof.com/images/emoticons/xsmall2/721_darth_vader_fighting_luke_skywalker.gif) (http://www.clipartof.com)
Title: Re: warren locking hubs
Post by: joesgarage71 on January 17, 2009, 11:26:38 am: Quote from: murraygmc on January 15, 2009, 01:05:19 pm
think theese will work ?
Did you try them in your hubs?
I have these
(http://i173.photobucket.com/albums/w77/Joesgarage71/SANY1699.jpg)
Title: Re: warren locking hubs
Post by: bigkountry on January 20, 2009, 07:13:40 pm: Quote from: VileZambonie on January 15, 2009, 05:11:52 pm
Those invisible bolts might work if you use the force to put them in. (http://www.clipartof.com/images/emoticons/xsmall2/721_darth_vader_fighting_luke_skywalker.gif) (http://www.clipartof.com)

lol
Title: Re: warren locking hubs
Post by: farmallgray on February 04, 2009, 03:08:08 pm: Napa carries them. I'm not sure if this link will work or not;
http://www.napaonline.com/NOLPPSE/(S(pcrswm551by2ey55g1cb0o55))/Results.aspx?Ntt=6351032&Ntk=Part%20Number&N=0&Nty=1&D=6351032&Dn=0&Dk=1&Dp=3

Part # 635-1032
Title: Re: warren locking hubs
Post by: murraygmc on February 04, 2009, 03:29:43 pm: yup got em in replaced all of them thanks