« previous next »
Pages: [1]   Go Down

Author Topic: warren locking hubs  (Read 11951 times)

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
warren locking hubs
« on: January 12, 2009, 08:50:33 pm »
any one know Ware to buy the Allen head bolts that keeps the switch in place ? my local auto store said they used to stock them but the compiny went under  i need about 5  thanks.   reason i need them is when i replaced the upper and lower ball joints and changed out the wheel joints and i also put new barrings under it they were broke off !  What a weekend so now all i need to do is replace the tie rod ends and drag link an then ill basically have the steering completely gone through. i figured if im going to replace one thing ill make shure its all good thanks again
Logged
85 gmc high serria 4x4

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: warren locking hubs
« Reply #1 on: January 12, 2009, 08:56:50 pm »
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: warren locking hubs
« Reply #2 on: January 12, 2009, 09:31:44 pm »
Any place that had a good quality hardware selection should have something in stock. I have a huge bag of stainless Phillips head screws that are the same size and thread. I have used them in the past. I have also used a drill to open up the inset hole so they don't seize up as easily again.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: warren locking hubs
« Reply #3 on: January 12, 2009, 09:43:22 pm »
thanks Joe and blazen   i tell ya what the work iv done to the truck this weekend was a wealth of experience it was kinda fun pressing the ball joints out and using a pickle fork
Logged
85 gmc high serria 4x4

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19169
Re: warren locking hubs
« Reply #4 on: January 13, 2009, 09:19:30 am »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: warren locking hubs
« Reply #5 on: January 13, 2009, 04:47:50 pm »
its a 85 how do i know witch ones i have
Logged
85 gmc high serria 4x4

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: warren locking hubs
« Reply #6 on: January 14, 2009, 08:41:09 pm »
Quote from: murraygmc on January 13, 2009, 04:47:50 pm
its a 85 how do i know witch ones i have

Thats why you take a spare (to match it up) with you to the nut and bolt suppiler. The fastenal store is 13 miles away from you. Washington In.
« Last Edit: January 14, 2009, 08:47:15 pm by joesgarage71 »
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: warren locking hubs
« Reply #7 on: January 14, 2009, 08:46:48 pm »
yep got them!!! ;D ; my buddy has a machine shop he gave me a hand full so im going to replace all of them  ;)
Logged
85 gmc high serria 4x4

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: warren locking hubs
« Reply #8 on: January 15, 2009, 01:05:19 pm »
think theese will work ?
Logged
85 gmc high serria 4x4

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: warren locking hubs
« Reply #9 on: January 15, 2009, 01:06:19 pm »
oh that didnt work
Logged
85 gmc high serria 4x4

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19169
Re: warren locking hubs
« Reply #10 on: January 15, 2009, 05:11:52 pm »
Those invisible bolts might work if you use the force to put them in.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: warren locking hubs
« Reply #11 on: January 17, 2009, 11:26:38 am »
Quote from: murraygmc on January 15, 2009, 01:05:19 pm
think theese will work ?
Did you try them in your hubs?
 I have these
 
« Last Edit: January 17, 2009, 12:03:44 pm by joesgarage71 »
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline bigkountry

  • Frequent Member
  • **
  • Posts: 453
Re: warren locking hubs
« Reply #12 on: January 20, 2009, 07:13:40 pm »
Quote from: VileZambonie on January 15, 2009, 05:11:52 pm
Those invisible bolts might work if you use the force to put them in.

lol
Logged
81 Scottsdale K10 "Under construction"

Offline farmallgray

  • Newbie
  • Posts: 89
Re: warren locking hubs
« Reply #13 on: February 04, 2009, 03:08:08 pm »
Logged
1979 K-20 350/TH400

Offline murraygmc

  • Frequent Member
  • **
  • Posts: 301
  • 85 gmc 4x4
Re: warren locking hubs
« Reply #14 on: February 04, 2009, 03:29:43 pm »
yup got em in replaced all of them thanks
Logged
85 gmc high serria 4x4
Pages: [1]   Go Up
« previous next »