73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Topic started by: GunMan9 on March 21, 2013, 10:57:56 pm
-
Can y'all show me some pics of where you mounted you CB. I have the plug and chug and the 4x4 shifter and it will not work under the ashtray for me. Looking for some other options
-
Man I had one installed in my 83 back in the day. It was installed directly underneath the radio. Worked out really well for me. I thought I might hit it with my leg, I am 6'2", and it never happened.
-
Ya I looked at putting it there but I feel my leg or foot will hit it. Is there a way to mount it to the floor with an incline?
-
I honestly wouldn't mount it on the floor....if anyone every set "B" then you would have them kicking every time. You might try mounting it like a semi, from the roof. I have seen this done before. sorry I don't have picks.
-
Ya I put a highliner headliner in and the cb is to big for that
(http://img.tapatalk.com/d/13/03/22/nasa5evy.jpg)
-
mine fit fine
(http://i49.tinypic.com/2hycp69.jpg)
-
I have the plug and chug drink hold though that goes into the ashtray
-
What radio do you have? I've got a Uniden PC68XL in my highliner...
-
want to sell the drink holder? LOL! I used to have a floor mount that had an extra speaker built into it that was pretty cool. Had it wired with a cigarette lighter plug in so it came out quick
-
I actually installed the plug and chug under the seat against the floor
-
I never had a problem with mounting mine below the ashtray, the largest CB I've had there was a Cobra 29 and a similarly sized Realistic. The slip-seat rig I put together for trucking will probably go in Earl until I figure out a new comm setup, and it's tiny enough I can mount it just about anywhere.
-
My Bluetooth Cobra.
-
I mounted mine on top of the dash pad, basically right after the lip for the dash cluster. I have it angled to face me and the mic hooked on next to the cubby above the heater controls...that way my cord stays out the way. I have a pic of it somewhere....I will find it after work and post it.
-
Here is where I mounted my CB .... I just drilled two little holes in the dash and bolted it through
(http://i1219.photobucket.com/albums/dd435/blazing816/IMAG0635_zps32b2150b.jpg)
(http://i1219.photobucket.com/albums/dd435/blazing816/IMAG0638_zpse79117b6.jpg)
-
Hey blazing,
what that little red switch to the left of your headlight switch do?
-
Hey blazing,
what that little red switch to the left of your headlight switch do?
It is a lighted rocker switch for the off-road lights I have mounted on the front bumper and I have two more switch for when I put the custom roll bar in the bed because it has 4 lights pointed forward and 2 pointed backwards and I am going to put them on different switches so I can turn the front or back on separately.
-
Nice! i just mounted my switches in the metal part of the dash below my radio