Author Topic: Rough starts...?  (Read 14170 times)

Offline Skunksmash

  • Senior Member
  • ****
  • Posts: 1398
Re: Rough starts...?
« Reply #30 on: May 21, 2009, 12:09:04 pm »
I guess by follow it, you mean trace down every line that it shows and see if it has a leak? I will do that today and see what i come up with. Although, what if i do so and the problem remains?

Offline Skunksmash

  • Senior Member
  • ****
  • Posts: 1398
Re: Rough starts...?
« Reply #31 on: May 21, 2009, 09:24:11 pm »
Well the very high idle is gone, after i checked every vacuum line on that diagram. I went ahead and hooked the EGR valve back up as well. I think this may be what killed the high idle. But, now for the very first time since i have owned the truck, the "Service Engine Soon" light is on. It is located just below the odometer. What do yall think? Replace the EGR valve?

Offline Skunksmash

  • Senior Member
  • ****
  • Posts: 1398
Re: Rough starts...?
« Reply #32 on: May 22, 2009, 02:06:06 am »
Well, drove a few more miles, and now even the light is off. And the truck is running fine.

 ???

I guess it just wanted to be messed with a little bit. I have had plenty of cars like that. Still, just another strange fuel injection problem.