« previous next »
Pages: [1]   Go Down

Author Topic: Newby with a 1-ton Crew cab project  (Read 13025 times)

Offline Whitfield

  • Newbie
  • Posts: 64
  • Building a V-3500 Crew Cab 4wd
Newby with a 1-ton Crew cab project
« on: November 30, 2009, 10:00:07 pm »
Bought the truck with a bad 350.  It was originally a 6.2L Diesel I've owned the truck 5 years (never driven it).

Been buying a few parts and parts trucks when they are cheap / Swapping out body pannels 

Swapped in a fresh built Caddy 500 in 2007

Ran into issues cleaning up the swap install details.

Pushed it around back for 2 years.

Brought back out front and began to finish buttoning up the big block Caddy swap.







Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7596
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Newby with a 1-ton Crew cab project
« Reply #1 on: November 30, 2009, 10:02:58 pm »
Great looking stance, love it! 
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Whitfield

  • Newbie
  • Posts: 64
  • Building a V-3500 Crew Cab 4wd
Re: Newby with a 1-ton Crew cab project
« Reply #2 on: November 30, 2009, 10:06:38 pm »
Thanks!   

I've got lots of questions about the 4wd supension lift.

Mine is currently stock with only a front add-a-leaf and a 3" Body lift.

I've got a 6" SuperLift kit with front and rear springs + shocks + front braided brake lines.

Hoping to loose the body lift and add the suspension lift, but not sure how a one size fits all 6" kit is gonna like my big wooly mammoth of a truck.
Logged

Offline 79K20

  • Registered Users
  • *
  • Posts: 107
Re: Newby with a 1-ton Crew cab project
« Reply #3 on: December 01, 2009, 10:29:06 am »
Awesome! Love the 3+3's!

That front clip looks sharp!
Logged

Offline oldyeller

  • Junior Member
  • ***
  • Posts: 513
  • 81 Chevy 3/4 ton
Re: Newby with a 1-ton Crew cab project
« Reply #4 on: December 01, 2009, 07:42:32 pm »
Great job.  Nice looking truck.
Logged
1981 Chevy 3/4 ton (aka yeller)
2001 Chevy 1/2 ton extended cab lifted with flames
1950 Dodge Wayfarer all original
1951 Chevy truck
6 extended cab square bodies
Just to name a few

Offline Whitfield

  • Newbie
  • Posts: 64
  • Building a V-3500 Crew Cab 4wd
Re: Newby with a 1-ton Crew cab project
« Reply #5 on: December 03, 2009, 12:22:13 pm »
The big Block Caddy



I've got a 800 cfm Q-jet prepped by The Carb Shop.  http://www.customcarbs.com/carbshopcatalogQjet.htm
Blue Printed (Stage 2 build), new shaft bushings, improved idle circuit, flow bench tested, with a fresh dichromate coating.



Picked up this Carb spacer for cheap off of Ebay~




Working in the dark sux...   Slow progress ~ but atleast it is progress.

Oddly enough since i pulled this project back out we have had record rain fall for the month.

Finishing up the oil pan / dip stick / dip stick tube (Big ordeal on the Big Block Caddy).

Tonight ~ checking clearance for the rotating assembly / dip stick and then buttoning up the oil pan.  

 
« Last Edit: December 03, 2009, 01:14:43 pm by Whitfield »
Logged

Offline truckjunky

  • Newbie
  • Posts: 6
Re: Newby with a 1-ton Crew cab project
« Reply #6 on: December 04, 2009, 07:27:11 am »
Truck is coming out very nice. Like to see it done. Hope the rain stops for you. Good luck with your project.
Logged
Life to short to drive anything else!:chevy:

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Newby with a 1-ton Crew cab project
« Reply #7 on: December 04, 2009, 07:36:00 am »
 You'll have to let us know how that carb works out, Carb Shop does good work. What was the price on that carb?
I might get one of those if I can't get my 92's TBI sorted out before spring, Frigin' Butchers that put it together.
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: Newby with a 1-ton Crew cab project
« Reply #8 on: December 04, 2009, 07:02:42 pm »
Is that a 3500?

If it is somebody stole your Dana60.
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline Whitfield

  • Newbie
  • Posts: 64
  • Building a V-3500 Crew Cab 4wd
Re: Newby with a 1-ton Crew cab project
« Reply #9 on: December 04, 2009, 08:17:00 pm »
 :D   Maybe ~ Not sure how to verify weather it is or is not a V3500 or what the options were.  

It had commercial chassis documentation on the original door.

Of course I want the 60.  But in reality it is just a hot rod tow rig for the boat and other 4wds.




 
Logged

Offline frito-bandito

  • Registered Users
  • *
  • Posts: 181
  • Hillbilly Deluxe
Re: Newby with a 1-ton Crew cab project
« Reply #10 on: February 01, 2010, 08:50:13 pm »
Sweet truck, 3+3's are the best trucks out there!
Logged
1981 Chevy dually 350 4spd. (One piece at a time)
1994 GMC C1500 4.3L 4L60E. (340K Daily Driver/Resto-Mod)
1998 GMC C1500 5.0L 4L60E (179K Daily Driver)

Offline crewcabfred

  • Newbie
  • Posts: 38
Re: Newby with a 1-ton Crew cab project
« Reply #11 on: February 01, 2010, 10:55:06 pm »
nice sammy
Logged

Offline bigwillie82

  • Newbie
  • Posts: 75
Re: Newby with a 1-ton Crew cab project
« Reply #12 on: February 01, 2010, 11:09:16 pm »
wow that truck is cool looking.that will definitely haul the groceries
Logged

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: Newby with a 1-ton Crew cab project
« Reply #13 on: February 02, 2010, 02:22:10 am »
Quote from: bigwillie82 on February 01, 2010, 11:09:16 pm
wow that truck is cool looking.that will definitely haul the groceries

Just have to park in the back of the lot!
Logged
Pages: [1]   Go Up
« previous next »